EMS NTI Enviromux E-5D
Medium Enterprise Environment Monitoring System
Monitor and manage server room environmental and security conditions over IP. Provides early warnings before critical events turn into disaster.
Also known as: Remote Server Environment Monitoring System, EMS, monitor network closet, data center thermometer, web alert thermometers temperature humidity IP sensor reading, computer rooms temperature alert, tcp/ip temp probe.
The ENVIROMUX® Enterprise Environment Monitoring System (EMS) monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, LEDs, alarm beacon, siren, web page, network management (SNMP), voice phone calls (via Automatic Voice Dialer System), and SMS messages (via email-to-SMS or external USB modem).
The system includes two internal sensors: temperature and humidity. It also supports five external configurable sensors, five digital input sensors, and two output relays for control of external devices.
- Monitor and manage server room environmental and security conditions over IP.
- Sensors supported by a single E-5D:
- 5 external configurable sensors
- 5 digital inputs sensitive to contact closure
- 2 internal sensors – temperature and humidity
- 8 Remote Temperature/Humidity Sensors over IP
- E-MICRO-TRH(P): 1 integrated temperature/humidity combination sensor, 2 RJ45 ports for external temperature/humidity sensors, 2 digital inputs sensitive to contact closure, optional built-in Power over Ethernet (POE), dual DC power.
- 4 Remote 1-Wire Sensors over IP
- E-1W(P): two RJ11 connectors for daisy chaining many 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination (up to 24 single-reading 1-wire sensors); two digital inputs sensitive to contact closure; dual DC power; optional Power over Ethernet (POE).
- Use an RJ45 RS485 Sensor Expander to add 8 RJ45 RS485 sensors.
- Use a Digital Input/Output Expander to add 16 digital inputs and 16 digital outputs.
- Two output relays for control of external devices.
- Relay activates upon alarm or via the user interface.
- Control output relays via SNMP SET commands to power on/off external devices.
- Supports NTI’s IP network video cameras for live view of any facility.
- One integrated view – see different Web cameras side-by-side with physical and environmental parameters.
- Any programmed event can trigger a snapshot from an IP camera.
- Monitor (ping) up to 64 IP network devices.
- Alerts are sent if devices are not responding
- Linux inside.
- Create multiple alerts for any installed sensor.
- Sensor conditions (events) can be configured to trigger alerts by themselves, and/or be used in combination with other events to trigger Smart Alerts.
- Configure up to 50 events.
- Setup SSH commands to be sent when events are triggered to soft shutdown or reboot machines.
- Up to 20 Smart Alerts can be configured to use different event combinations to send alert messages.
- Alerts are posted in message log, which is accessible through Web user interface.
- Automatically configures network settings received from a connected DHCP server.
- If a DHCP server is not found, the default static IP address will be used.
- Integrates with various Open Source monitoring packages – Nagios and MRTG.
- The unit can be polled via SNMP.
- USB ports for connecting USB modem or for downloading log data to USB flash drive.
- Available with optional internal battery backup.
- Alerts are sent when there is a power outage and when power returns.
- Dual redundant power supplies for connection to two separate power sources
- The second power supply is sold separately.
- Available with optional 48VDC power
- Comes with a 48V DC-DC power converter built inside the unit.
- Up to five units can be used together to increase the number of sensors connected.
- Cascade up to four E-2D/5D/16D units as slaves to one E-2D/5D/16D master unit via Ethernet connection.
- Each master and slave unit needs its own unique IP address.
- Uses a single Web interface for all systems/sensors connected.
- Optional industrial medium environment monitoring systems for harsh environments with low/high temperatures from -40 to 185°F (-40 to 85°C).
- Industrial model with backup battery: 32 to 140°F (0 to 60°C)
- Optional Self-Hosted Enterprise Environment Monitoring System Management Software for monitoring and configuring up to 3,000 E-2D/5D/16D//MICRO/1W devices and all connected sensors. Access from anywhere using a web browser on a computer, smartphone, and/or tablet. No clients or special apps to install.
- Flexible Zero-RU mounting.
- Mounting tabs included.
- Optional DIN mounting available.
- Optional 1RU rackmount kit available; the ENVIROMUX unit can be mounted with the front (sensor connector side) or rear (additional status LEDS with alarm test/silence button side) facing out.
- Security: HTTPS, SSHv2, SSLv3, IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
- Multi-language support – English, German, Chinese, and Japanese.
- Use in data centers, co-lo sites, web hosting facilities, telecom switching sites, POP sites, server closets, or any unmanned area that needs to be monitored.
- Use the E-5D with a wireless router and Wi-Fi Range Extender to create a Wireless Environment Monitoring System.
- Configure, monitor, and receive alerts without the use of a wired network connection.
Keunggulan Produk
Fitur Fitur EMS NTI Enviromux E-5D
- 5 external configurable sensors, 5 digital inputs, 2 output relays
- Configure Smart Alerts for different event combinations
- User-programmable IP camera snapshots
- Linux inside
- Optional 48V DC-DC power converter built inside the unit.
- Cascade up to 5 units via Ethernet connection (1 master, 4 slaves)
- Triggered Events can send SSH commands to soft shutdown or reboot machines
Spesifikasi EMS NTI Enviromux E-2D
RJ45 Sensor Ports
- Five RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass break, vibration and motion sensors.
- Two levels of user-defined alerts – non-critical and critical.
- Provides +12 VDC, 100 mA for each port
Digital Inputs
- Five screw terminal pairs for connecting dry contact devices.
- Potential-free
- Input voltage: 0VDC to +25VDC
- Over-voltage surge protection
- Maximum resistance to close contact: 300K Ohm
Output Relays
- Two screw terminals pairs.
- Potential-free relay switch contacts.
- Normally open / normally closed connection points.
- Maximum switching load: 0.5A at 125VAC, 1A at 30VDC, 0.5A at 48VDC.
Alarm Port
- One screw terminal pair.
- Provides +12VDC, 180 mA to supply an alarm beacon or siren.
- Fuse protection
AUX Power
- One screw terminal pair.
- Provides +12 VDC, 500 mA.
RS232 AUX Port
- One RJ45 port for connecting a serial GSM modem or a remote serially-controlled device.
USB Device Ports
- Four female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive.
USB Console Port
- One female USB Type B connector for connecting a PC for serial terminal access.
Ethernet Port
- One 10/100 Base-T Ethernet port with RJ45 Ethernet connector.
- Supports full- and half-duplex.
Power
- Dual DC power.
- If the first power source fails, the unit will automatically, without interruption, switch over to the second power source before switching to the optional battery backup.
- Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter.
- Includes one 9VDC, 3A country-specific AC adapter. The second AC adapter is sold separately.
- Voltage output: 9-12VDC
- Power Consumption: 15W
- Optional 48VDC power.
- E-5D-48V
- Accepts 18~72VDC (48VDC nominal).
- For installation in a 48V or 24V Telecom environment.
- E-5D-IND48VLT
- Accepts 36~72VDC (48VDC nominal).
- For installation in a 48V Telecom environment.
- Use the PWR-48V-12V1-6A DC-DC power converter to install all other E-5D units in a 48V or 24V Telecom environment.
Protocols
- HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, TLS v1.2, LDAPv3, XOAUTH2, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0, RADIUS
- Support for XOAUTH2 provides higher security authentication for email accounts (e.g. Gmail).
- Compatible with any SNMP management software.
- The unit can be polled via SNMP.
- Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB/RJ45 serial interface.
- Supports Internet Explorer 6.0 and higher, Firefox 1.5 and higher, Netscape 9, Google Chrome, Safari 1.3 and higher for MAC, and Safari 3.0 and higher for PC.
- Multiplatform support: Windows 7/8/10, Windows Server 2008/2012/2016/2019, Solaris, Linux, FreeBSD, and MAC OS 10/11.
- An IP address can be assigned to the E-5D automatically by a DHCP server.
- Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem).
- Alerts are posted in event log, which is accessible through Web user interface.
- Email alerts can be sent to 17 addresses.
- Users can configure the schedule for when they will be alerted, as well as customize the e-mail subject line for each sensor alert.
- SNMP traps have unique OID’s (Object Identifiers) for each sensor.
- Supports HTTP REST API to poll sensor data with response in JSON format.
Internal Temperature Sensor
- For monitoring the temperature inside the E-5D case.
- Use an external temperature sensor for monitoring ambient air temperature.
- Applications from:
- E-5D and E-5DB-IND: 32 to 140°F (0 to 60°C)
- Accuracy:
- ±1.44°F (±0.80°C) for 32 to 41°F (0 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- E-5DB: 32 to 104°F (0 to 40°C)
- Accuracy:
- ±1.44°F (±0.80°C) for 32 to 41°F (0 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 104°F (5 to 40°C).
- E-5D-IND: 32 to 176°F (0 to 80°C)
- Accuracy:
- ±1.44°F (±0.80°C) for 32 to 41°F (0 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- ±1.62°F (±0.90°C) for 140 to 176°F (60 to 80°C).
- E-5D-INDLT/IND48VLT: -40 to 185°F (-40 to 85°C)
- Accuracy:
- ±2.16°F (±1.20°C) for -40 to -4°F (-40 to -20°C).
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- ±1.62°F (±0.90°C) for 140 to 185°F (60 to 85°C).
Internal Humidity Sensor
- For monitoring the humidity inside the E-5D case.
- Use an external humidity sensor for monitoring humidity in the air.
- Applications from:
- E-5D, E-5DB, E-5D-IND, E-5DB-IND: 20% to 80% RH, ±3% (at 77°F/25°C)
- E-5D-INDLT/IND48VLT:
- Accuracy (at 77°F/25°C):
- 15 to 20% relative humidity, ±4%
- 20 to 80% relative humidity, ±3%
- 80 to 90% relative humidity, ±4%
Dimensions
- WxDxH:
- E-5D(-D): 7.88x3x1.75 in (200x76x44 mm)
- E-5DB(-D): 7.88x3x1.75 in (200x76x44 mm)
- E-5D-48V(LT): 10.6×3.1×1.75 in (269x79x44 mm)
- E-5D-IND(LT): 7.88x3x1.75 in (200x76x44 mm)
- E-5DB-IND: 10.6×3.1×1.75 in (269x79x44 mm)
- Optional 1RU rackmount kit available (E-RK1-5D(BIND))
- The ENVIROMUX system can be mounted so that the sensor connectors are facing the front or back of the rack.
Weight
MTBF
- E-5D: 170,344 hours.
- E-5DB: 169,279 hours.
- E-5D-48V: 151,947 hours.
Environmental
- Operating temperature:
- E-5D: 32 to 140°F (0 to 60°C)
- E-5DB: 32 to 104°F (0 to 40°C)
- E-5D-IND: 32 to 176°F (0 to 80°C)
- E-5DB-IND: 32 to 140°F (0 to 60°C)
- E-5D-INDLT/IND48VLT: -40 to 185°F (-40 to 85°C)
- Storage temperature:
- E-5D: -22 to 140°F (-30 to 60°C)
- E-5D-INDLT/IND48VLT: -40 to 185°F (-40 to 85°C)
- Operating/Storage Relative Humidity: 5 to 90% non-condensing RH.
Regulatory Approvals
Warranty
Sensor & Aksesoris EMS NTI Enviromux E-5D – Dijual Terpisah
Environmental Sensors
- Remote Temperature/Humidity Sensor over IP
- Temperature Sensors
- RTD Temperature Transmitters/Sensors
- Temperature/Humidity Sensors
- Industrial Temperature/Humidity Sensors
- Rope-Style Leak Detectors
- Leak Location Detection Sensors
- Spot Leak Detectors
- Under Carpet & Tape-Style Detectors
- Liquid Level Float Switches
- Ultrasonic Level Transmitter
- Water Flow Sensors
- Smoke Detectors
- Gas Detectors
- Dust Detectors
- Air Flow/Velocity Detectors
- Outdoor Temperature Sensor
- Wind Speed Sensor
- Barometric Pressure Transmitter
- Pressure Sensors
- Noise Level Sensor
Power Relays & Sensors
- Power Over Ethernet Adapters
- AC Voltage Detectors
- AC & DC Power Monitors
- Hall-Effect Sensors
- 3-Phase Power Monitors
- Current Transformers
Security Sensors & Access Control
- Door Contact Sensors
- Vibration & Glass Break Sensors
- Motion Sensors
- Tamper Switch
- Emergency/Panic Button
- Light Intensity Sensor
- Access Control
Alert & Communication Accessories
- Automatic Voice Dialer Systems
- USB Modems
- IP Surveillance Cameras
- Siren Alarms
- Alarm Beacons
Sensor Accessories
- Programmable LED Sensor Display
- RJ45 RS485 Sensor Expander
- Digital Input/Output Expanders
- RS485/RS232/RS422 to Fiber Converter/Extender
- Sensor Converters – 4-20mA, 5VDC
- WiFi Range Extender
- Sensor Cables
- Surge Protectors
- Intrinsically Safe Barrier
Optional Replacement Back-up Battery
Ulasan
Clear filtersBelum ada ulasan.