EMS Didactum Monitoring System 600 II
The Didactum Monitoring System 600 is Didactum’s most powerful monitoring system. Equipped with four processor cores and 1GB RAM, it manages up to 400 physical sensors and actuators and a total of up to 2000 logical elements. With the software extension “Didactum Manager” you can use the system for the central administration of several Didactum monitoring systems.
- Monitoring of larger areas in the data centre
- Monitoring of several rooms and assets
- Central control of several Didactum monitoring systems
Monitored environmental parameters
A large number of standard sensors are available for the Didactum Monitoring System 600, e.g. for monitoring temperature, humidity, airflow, doors and windows or water intrusion. In addition, the monitoring system is equipped with a Modbus RTU interface that records sensor values from up to 50 sensors via the fieldbus. Via the connectors for current and voltage, you can evaluate sensors that are equipped with a 0-10V or 4-20mA interface.
The monitoring system 600 is equipped with 32 potential-free switching inputs to which you can connect detectors, e.g. for door contacts, smoke detectors and fault alarm contacts of air-conditioning systems. With the additionally available CAN extension unit, you can expand the system by another 64 inputs. For the control of actuators, 8 potential-free switching outputs are available. Furthermore, two relays are built in, via which you can switch load currents of 240VAC/10A. Alarm transmitters are supplied via two voltage outputs with 12 VDC/0.25A.
The Didactum monitoring system reports critical environmental conditions via e-mail, SNMP trap and, when using a 5G LTE modem, also via SMS. You can also use the modem as an SMS gateway to enable other Didactum monitoring systems in the environment to send SMS. Alarms are still provided via Syslog. In addition, we offer various actuators that issue alarms visually and acoustically.
The monitoring system has a port for RFID card readers to which you can connect up to two readers and assign access authorisations for them. Please note that the authorisations are not configured per reader at system level. EMS Didactum Monitoring System 600 II
The Monitoring System 600 II supports the connection of one AV camera, two USB cameras and two integrations of up to four IP cameras. You can record the images, but note that due to the event model, the video recording does not trigger directly, but the recording starts delayed by a few seconds.
Measured values can be read out via SNMP and the REST api. Furthermore, data access is possible via the REST API. This also allows write access to the monitoring system. For example, you can send script-controlled SMS, switch outputs and even adjust the configuration.
The system can be set up conveniently via the web interface. Furthermore, you can manage the monitoring system script-controlled via the REST API. The Monitoring System 600 II also supports the administration of further monitoring systems via the software extension “Didactum Manager”. Various licences are available for this.
For recording log files and video data, you can expand the system with various permanent memories. We recommend that you install an SSD. However, you can also use slots for SD cards (SDXC up to
128GB, SDHC up to 32GB) or USB memory. Please note that these ports may be needed for other tasks.
Central management system for Didactum monitoring systems
The software extension “Didactum Manager” allows you to manage several Didactum monitoring systems. This includes configuration management as well as firmware version management.
Spesifikasi EMS Didactum Monitoring System 600 II
Processor (Cores, Speed)
720mHz, 4 Cores
USB 2.0 micro, USB 2.0 Type A
LTE, Gateway over Internet, SMS-notification
M2M-Protocols and Busses
SNMPv1, SNMPv2C, SNMPv3
Modbus/TCP (Read and Write)
DHCP; HTTP; HTTPS; DynDNS; SSL; SMTP; FTP; Syslog; RADIUS
Analogue sensor ports
8 analogue RJ-12 sensors with automatic detection
CAN expansion port
RJ12 port for connecting CAN sensors/extensions/devices to a CAN bus. The modules can be coupled with each other.
Dry contact inputs
up to 32 with built-in extension, up to 64 with CAN bus dry contact unit
Modbus-RTU (Master, up to XX sensors)
Connection for RFID reader
Switching outputs 12V 0,25 A
Switching outputs potential free
Number of analogue sensor ports
8 built-in Ports
Number of possible extension ports (CAN)
Max. Number of physical elements (sensors, actuators, inputs and outputs)
Max. Number of logical elements (notifications, timer, logic) (incl. physical elements etc.)
Support for 0-10V sensors
Support for 4-10mAV-sensors
Support for Modbus/RTU-sensors
Support for Modbus/TCP-sensors
E-Mail (up to XX recepients)
SMS (with LTE option up to XX recipients)
AV, x2 USB, x4 IP
Video power supply DC 12V 0.25A for analogue camera
SD card slot (SDHC up to 32Gb, SDXC up to 128Gb)
SATA drive: 2.5″ HDD or SSD (optional)
-10°C bis 80°C
-25°C bis 85°C
0 bis 90% rF, non-condensing
0 bis 95% rF, non-condensing
Terima kasih telah memesan produk EMS Didactum Monitoring System 600 II, Kami Spesialis Elektronik sangat bersemangat untuk memproses pesananmu. Jangan lupa untuk memeriksa halaman toko kami untuk berbelanja lebih banyak lagi, ya!