Beranda / Toko / EMS / Sensor EMS / Didactum 14020 Water Leak Cable Sensor

Didactum 14018 Water Leak Sensor
Rp 5.076.207

Didactum 14260.4 Water Detection Cable
Rp 6.611.331
Didactum 14020 Water Leak Cable Sensor
0 Terjual
Rp 4.053.570
The critical functionality of data centers and other facilities can be easily affected by water. Any type of exposure to electronics in server rooms or other facilities could lead to electrical short circuits causing catastrophic failures in equipment.
0
People watching this product now!
Deskripsi produk
Spesialis Elektronik – Didactum 14020 Water Leak Cable Sensor
Didactum Water Leak Cable Sensor
The critical functionality of data centers and other facilities can be easily affected by water. Any type of exposure to electronics in server rooms or other facilities could lead to electrical short circuits causing catastrophic failures in equipment.
Accidents caused by storms, pipes breaking or other water related problems can cause your important infrastructure to be quickly flooded within a very short time. Even if the nearest river or stream is located far from your facility tragedy can be unexpected and quick.Often social rooms, kitchens and toilets are located next to or above your server room or data center which can directly affect your critical operations if there are problems with water. These factors must be taken into account in your risk assessment solution.
Typical applications of this water detection sensor:
- Detection of water leakage from heating and/or air conditioning systems
- Detection of water leakage from f ire / sprinkler systems
- Alerts in case of defective water-cooled server cabinets
- Alerts in case of ruptured battery’s caused by defective UPS systems
Reliable detection of water and moisture by Didactum water sensor
Server rooms and data centers are often equipped with raised floors. To be alerted reliably when water is present Didactum`s Water detection cable should be installed under these raised floors. This cable has a total length of up to 50 meters and is easily placed under the raised floor of your data center or server room. The Water detection cable is then easily connected to the Didactum Water Leak Cable sensor.
The Water Leak Cable sensor is then connected to one of the eight sensor ports on the SNMP-enabled Didactum Monitoring System. Didactum`s Sensor Expansion units can also be used to conect a larger number of these Water Detection cables. Thanks to the built-in auto identification feature the Didactum Water Leak cable sensor is automatically detected by Didactum monitoring device. Then you can set the type of notification in case of flooding and water intrusion.
Each Didactum remote monitoring appliance can alert you and your colleagues via E-Mail, SMS (GSM modem mandatory) or by SNMP traps to automation systems or NMS (CA Spectrum, IBM Tivoli, Nagios, OpenNMS, WhatsUp Gold, Zabbix and many more). The Didactum devices can even switch relays in case of flooding. All events are stored in syslog of the Didactum main unit.
Please note that you must order the water cable separately!
Technical specifications
- Temperature range : -10… +90°С
- Response time : 15 sec
- Recovery time : 1 min up to 1 hour, depends from detection cable to be dry
- Maximum distance : 100 meters
Features
- Customs code : 9025 80 400 0
- Installation : On the bottom there is a ledge with Ø 4.5 mm and height 1 mm; and a mounting hole in 50 mm from it for fastening sensor by screw 4.8×16mm. 2-pin terminal strip type TBW-5-2p with mounted water detection cable is plugged into sensor’s connector.
- Connection : Connector RJ12 is connected to an analog input of any system unit. Determination of sensor’s type and connection occur automatically. The other end of the sensor connects 2-wire water detection cable with a plug.
- Supply includes : Sensor, cable, terminal strip type TBW-5-2p, screw 4.8×16mm, double sided sticker. Water detection cable SC-WDC 50m is ordered separately!
- Net weight : 60g
- Dimensions : (LHW) 60×18×18mm
Informasi Tambahan
Berat | 1 kg |
---|---|
produk |
Barang |
merek | |
kondisi |
Baru |
jenis-sensor |
Sensor Cairan |
Ulasan (0)
Dinilai 0 dari 5
0 reviews
Dinilai 5 dari 5
0
Dinilai 4 dari 5
0
Dinilai 3 dari 5
0
Dinilai 2 dari 5
0
Dinilai 1 dari 5
0
Jadilah yang pertama memberikan ulasan “Didactum 14020 Water Leak Cable Sensor” Batalkan balasan
Anda harus login untuk mengirimkan ulasan.
Tentang DIDACTUM
Didactum® Ltd. Deutschland is a value added distributor of high availability monitoring products.
The core mission of Didactum® is the planning and integration of proactive SNMP-based environmental and security solutions.
Informasi Pengiriman
SYARAT & KETENTUAN BERBELANJA
- Biasakan Sebelum ORDER barang untuk tanya stock barang karena perputaran barang sangat cepat.
- Ongkos untuk pengiriman dan retur barang (komplain) sepenuhnya ditanggung oleh pembeli
- Barang yang sudah dibeli tidak dapat ditukar atau dikembalikan dengan alasan apapun.
- Jika tidak ada keterangan warna yang dipilih, maka barang dikirim secara acak.
- Semua barang yang dijual di toko online kami adalah 100% baru.
- Seluruh barang yang dikirim sudah dipastikan tidak ada kerusakan/cacat.
- Pengemasan barang kiriman akan dilakukan seaman mungkin.
- Jika terjadi kerusakan barang yang disebabkan oleh pihak pengiriman, adalah diluar tanggung jawab kami.
JADWAL WAKTU & INPUT NOMOR RESI PENGIRIMAN
- Waktu pengiriman : Senin - Jumat Pukul 16.00 WIB (Khusus Yes Pukul 15.00 WIB)& Sabtu Pukul 15.00 WIB.
- Pemesanan yang masuk sebelum pukul 16.00 WIB, akan dikirim pada hari yang sama.
- Pemesanan yang masuk melewati pukul 16.00 WIB, akan dikirim pada hari berikutnya.
- Nomer resi pengiriman akan input pada malam hari sekitar pukul 21.00 -24.00 WIB / pada keesokan harinya.

SKU:
2026060837538
Kategori: Sensor EMS
Produk Terkait
NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
Rp 1.080.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
- For detecting water presence and warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Water sensor cable cannot be in contact with any conductive surfaces or overlap on itself.
- Minimum puddle: 0.06" (1.5 mm) diameter.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600 feet.
- Material: PVC twisted pair with stainless 316 elements
- Diameter: 0.14" (3.5 mm)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
NTI E-RTDS-A221 All-Purpose 100 Ohm RTD Sensor
Rp 5.850.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-RTDS-A221 All-Purpose 100 Ohm RTD Sensor
- Rugged, point-sensitive waterproof sensor with 304 stainless steel probe and brass fitting.
- Applications from -67 to 221°F (-55 to 105°C).
- Accurate to within ±0.27°F (±0.15°C).
- Probe size: 9" (229 mm)
- Brass fitting with 1/2" NPT male thread.
- Cable length: 18" (457 mm) 2-wire lead.
- 100 Ohm Pt 385 curve.
- Suitable for plenum mounting, duct mounting, immersion wells, or outside air.
- Regulatory approvals: CE
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-RTDS-D240 Duct 100 Ohm RTD Sensor
Rp 2.610.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-RTDS-D240 Duct 100 Ohm RTD Sensor
- Rugged, waterproof sensor with 304 stainless steel probe.
- Applications from -67 to 240°F (-55 to 115°C).
- Accurate to within ±0.27°F (±0.15°C).
- Probe size: 9" (229 mm) probe with 4" (102 mm) electrical strap and a nylon fitting.
- Nylon fitting with 1/2" NPT female thread
- Cable length: 18" (457 mm) 2-wire lead.
- 100 Ohm Pt 385 curve.
- Designed for direct mounting on sheet metal duct systems.
- Regulatory approvals: CE
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-RTDS-PAR540-xxIN Pipe 100 Ohm RTD Sensor with Adjustable Ring
Rp 5.625.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-RTDS-PAR540-xxIN Pipe 100 Ohm RTD Sensor with Adjustable Ring
- Monitor temperature on pipe surfaces.
- Applications from -58 to 540°F (-50 to 280°C).
- Accuracy:
- At 32°F (0°C), ±0.54°F (±0.3°C)
- At 212°F (100°C), ±1.44°F (±0.8°C)
- 100 Ohm Pt 385 curve.
- 6 ft (1.83 m) 3-wire lead.
- Adjustable ring to fit diameter of pipe.
- E-RTDS-PAR540-2IN: Fits 1.25" to 2" pipe diameter.
- E-RTDS-PAR540-6IN: Fits 2" to 6" pipe diameter.
- E-RTDS-PAR540-12IN: Fits 6" to 12" pipe diameter.
- Regulatory approvals: RoHS.
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-STHS-LSH Fan-Aspirated Temperature/Humidity/Dew Point Sensor, Low Self-Heating
Rp 7.200.000
Dinilai 0 dari 5
- Fan-Aspirated Temperature/Humidity Sensor compensates for parasitic heating due to electrical power dissipation and/or exposure to solar radiation.
- Internal fan constantly draws air in over the sensor, providing highly accurate temperature readings.
- Ideal for installations where steep temperature gradients are common, and where there is little to no air flow.
- Use in freezers where there is intermittent air flow.
- Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% relative humidity.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- Inflation due to self-heating: <0.9°F (0.5°C) typical, 2.3°F (1.3°C) max.
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- Aspiration rate: 1 cfm (0.2 ft/s)
- Dimensions (including mounting brackets) WxDxH (in): 2.19x2.87x1.41 (56x73x36 mm)
- Communication type: RS485
- Compatible with E-2D/5D/16D.
- Powered by E-2D/5D/16D.
- Current consumption: 17mA @ 5VDC and 25mA@12VDC
- MTBF: 423,371 hours
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.
NTI E-STHSM-E7 Probe-Style Temperature/Humidity/Dew Point Sensor
Rp 3.240.000
Dinilai 0 dari 5
- For use with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% relative humidity (operating and storage).
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1000 feet (305 m) using CATx cable (minimum 24AWG).
- MTBF: 4,195,068 hours.
- Current consumption: 7mA @5VDC.
- Powered by E-2D/5D/16D.
- Communication type: RS485
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.
NTI E-STS-O IP65 Outdoor Temperature Sensor
Rp 3.300.000
Dinilai 0 dari 5
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±0.9°F (±0.5°C).
- Weatherproof enclosure.
- IP65-rated water and dust protection.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Quick release waterproof RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- Dimensions WxDxH (in): 4.53x2.56x2.13 (115x65x54 mm).
- MTBF: 1,860,032 hours.
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STSP-7 Pipe Temperature Sensor
Rp 5.895.000
Dinilai 0 dari 5
- Mount to the outside of a thin walled steel, copper, or aluminum pipe (up to 1/4" wall).
- Copper contact transmits surface temperature to thermal sensor.
- Weatherproof enclosure designed to IP65 specifications.
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- MTBF: 3,540,911 hours.
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Self centering mounting bracket available for 1-3" (25 mm) diameter pipe, and 3-6.5" (76 mm) diameter pipe (included).
- Included adjustable cable ties secure mounting bracket to pipe.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Ulasan
Clear filtersBelum ada ulasan.