Didactum 14010 Temperature Sensor
Rp 3.537.672
Didactum 14020 Water Leak Cable Sensor
Rp 4.053.570
Didactum 14018 Water Leak Sensor
0 Terjual
Rp 5.076.207
This Didactum leak sensor has been developed for the reliable detection of water and moisture. This water leak sensor is compatible with all Didactum SNMPv1/v2c/v3 enabled remote monitoring devices.
0
People watching this product now!
Deskripsi produk
Spesialis Elektronik – Didactum 14018 Water Leak Sensor
Didactum leakage sensor – reliable detection of water and condensation
This Didactum leak sensor has been developed for the reliable detection of water and moisture. This water leak sensor is compatible with all Didactum SNMPv1/v2c/v3 enabled remote monitoring devices. Simply connect this leakage sensor via the patch cable included to one of the 8 sensor ports of your Didactum monitoring system.
With the unit’s built auto-sense feature your water leakage sensor is immediately detected and displayed in the multilingual web interface of your Didactum monitoring device. From the user friendly web GUI you can now set the desired type of alert you require for example email alerts, SMS alerts (GSM Modem needed), alerts via SNMP traps to your building or system monitoring software
Typical applications of this water detection sensor:
- Detection of water leakage from heating and/or air conditioning systems
- Detection of water leakage from fire / sprinkler systems
- Alerts in case of defective water-cooled server cabinets
- Alerts in case of ruptured battery’s caused by defective UPS systems
Quick and easy installation of Didactum`s water leakage sensor
The leak sensor is supplied complete with screws and mounting tape. A two meter patch cable is also included. You can also extend this water detection sensor if required with your own patch cable up to 100 meters from the Didactum remote monitoring system.
Technical specifications
- Temperature range : -10… +90°С
- Response time : 1 sec
- Recovery time : 1 sec
- Maximum distance : 100 meters
Features
- Customs code : 9025 80 400 0
- Installation : On the bottom there is a ledge with Ø 4.5 mm and height 1 mm; and a mounting hole in 50 mm from it for fastening sensor by screw 4.8×16mm. There are two metal cores on the side of device.
- Connection : Connector RJ12 is connected to an analog input of any system unit. Determination of sensor’s type and connection occur automatically.
- Supply includes : Sensor, 4-wired cable RJ-12 (2m), bracket, 2 screws and 2 nuts M5, screw 4.8×16mm, double sided sticker.
- Net weight : 120g
- Dimensions : (LHW) 60×18×18mm
Informasi Tambahan
| Berat | 1 kg |
|---|---|
| produk |
Barang |
| merek | |
| kondisi |
Baru |
| jenis-sensor |
Sensor Cairan |
Ulasan (0)
Anda harus login untuk mengirimkan ulasan.
Tentang DIDACTUM
Didactum® Ltd. Deutschland is a value added distributor of high availability monitoring products.
The core mission of Didactum® is the planning and integration of proactive SNMP-based environmental and security solutions.
Informasi Pengiriman
SYARAT & KETENTUAN BERBELANJA
- Biasakan Sebelum ORDER barang untuk tanya stock barang karena perputaran barang sangat cepat.
- Ongkos untuk pengiriman dan retur barang (komplain) sepenuhnya ditanggung oleh pembeli
- Barang yang sudah dibeli tidak dapat ditukar atau dikembalikan dengan alasan apapun.
- Jika tidak ada keterangan warna yang dipilih, maka barang dikirim secara acak.
- Semua barang yang dijual di toko online kami adalah 100% baru.
- Seluruh barang yang dikirim sudah dipastikan tidak ada kerusakan/cacat.
- Pengemasan barang kiriman akan dilakukan seaman mungkin.
- Jika terjadi kerusakan barang yang disebabkan oleh pihak pengiriman, adalah diluar tanggung jawab kami.
JADWAL WAKTU & INPUT NOMOR RESI PENGIRIMAN
- Waktu pengiriman : Senin - Jumat Pukul 16.00 WIB (Khusus Yes Pukul 15.00 WIB)& Sabtu Pukul 15.00 WIB.
- Pemesanan yang masuk sebelum pukul 16.00 WIB, akan dikirim pada hari yang sama.
- Pemesanan yang masuk melewati pukul 16.00 WIB, akan dikirim pada hari berikutnya.
- Nomer resi pengiriman akan input pada malam hari sekitar pukul 21.00 -24.00 WIB / pada keesokan harinya.
Produk Terkait
NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
Spesialis Elektronik – NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
- For use in areas where E-LLDS-xx sensing cable is not required.
- Available lengths: 10/25/50/100 feet and custom lengths up to 1,000 feet.
- Contact an NTI product consultant for custom cable lengths
- M12 4-pin connectors.
- 22 AWG stranded bare copper conductors.
- Color-coded plenum-grade PVC insulation.
- Plenum-grade PVC jacket.
- Cable diameter: 0.136 in
- Operating temperature: 14 to 140°F (-10 to 60°C)
- Will ship in either white or gray.
- Regulatory approvals: CE, RoHS
- Compatible with E-ALDS Addressable Leak Detection Sensor and E-LLDC-xx Liquid Location Detection Sensor Cables.
NTI E-RTDS-MP482 Mini Probe 100 Ohm RTD Sensor
Spesialis Elektronik – NTI E-RTDS-MP482 Mini Probe 100 Ohm RTD Sensor
- Applications from -319 to 482°F (-195 to 250°C).
- Accurate to within ±0.27% x°F (±0.15% x°C).
- Probe size: 0.12" (3 mm) round x 0.79" (20 mm) long stainless steel housing.
- Cable length: 3.28 ft (1 m) 4-wire lead.
- PT100, Type A, 385 curve
- Requires the E-RTDT-1562 to operate with the E-2D/5D/16D.
NTI E-STHSB-D Temperature/Humidity/Dew Point Sensor, DIN Mounted
- Applications from -4 to 185°F (-20 to 85°C) and 0 to 90% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- ±1.62°F (±0.90°C) for 140 to 185°F (60 to 85°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- DIN mountable
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STHSB-N4085IND-x Industrial Temperature/Humidity Sensor
- Applications from -40 to 185°F (-40 to 85°C) and 0 to 100% non-condensing relative humidity.
- Accuracy:
- ±0.7°F (± 0.4°C) at 14 to 185°F (-10 to 85°C)
- ±1.6°F (± 0.9°C) at -40 to 14°F (-40 to -10°C)
- ±3% relative humidity at 0 to 80% non-condensing RH and 86°F (30°C)
- ±4.5% relative humidity at 80 to 100% non-condensing RH and 86°F (30°C)
- High resistance to external influences on the cable due to digital output signal.
- RJ45 connector.
- Voltage supply: 5VDC
- Current consumption:
- +5V Rail: 4.9V
- DC Current: 13mA
- Communication type: RS485
- Data rate: 96kbps
- Available lengths for attached CAT5e cable: 10/25/35/50/100 feet.
- Call for pricing on custom lengths up to 1,000 feet.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STS Temperature Sensor
- Applications from 32 to 122°F (0 to 50°C).
- Accurate to within ±0.9°F (±0.5°C).
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- MTBF: 3,784,839 hours.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STS-O IP65 Outdoor Temperature Sensor
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±0.9°F (±0.5°C).
- Weatherproof enclosure.
- IP65-rated water and dust protection.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Quick release waterproof RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- Dimensions WxDxH (in): 4.53x2.56x2.13 (115x65x54 mm).
- MTBF: 1,860,032 hours.
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STSM-E7 Probe-Style Temperature Sensor
Spesialis Elektronik – NTI E-STSM-E7 Probe-Style Temperature Sensor
- For use with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Applications from -4 to 140°F (-20 to 60°C).
- High resistance to external influences on the cable due to digital output signal.
NTI E-STSMA-E7 Probe-Style Temperature Sensor
Spesialis Elektronik – NTI E-STSMA-E7 Probe-Style Temperature Sensor
- For use with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Applications from -4 to 140°F (-20 to 60°C).
- High resistance to external influences on the cable due to digital output signal.
Ulasan
Clear filtersBelum ada ulasan.