Beranda / Toko / EMS / Sensor EMS / Didactum 14702 Modbus AC Smart Meter
Didactum 14702 Modbus AC Smart Meter
0 Terjual
Rp 7.848.930
This calibrated 1-phase AC Smart Meter is equipped with RS485 Modbus RTU interface. It is MID approved and suitable for third party power billing. Thanks to its RS485 Modbus RTU interface, this Smart Meter can be integrated into the SNMP-enabled remote measuring and monitoring units from manufacturer Didactum.
0
People watching this product now!
Deskripsi produk
Spesialis Elektronik – Didactum 14702 Modbus AC Smart Meter
This calibrated 1-phase AC Smart Meter is equipped with RS485 Modbus RTU interface. It is MID approved and suitable for third party power billing. Thanks to its RS485 Modbus RTU interface, this Smart Meter can be integrated into the SNMP-enabled remote measuring and monitoring units from manufacturer Didactum.
Thus you can remotely read and monitor this smart 1-phase 2-wire AC meter via TCP/IP network or Internet. Measure and monitor the energy consumption around the clock. It is advantageous that this Modbus AC meter is suitable for DIN rail mounting.
Notes from the technical editor:
Please note that your SNMP-compliant Didactum remote measuring and monitoring unit must be equipped with the optional Modbus RTU adapter. Didactum`s Modbus RTU adapter supports to monitor up to 32 different Modbus RTU devices / meters / sensors. Each Modbus device / meter / sensor will addressed using individual input hex registers. Each Modbus device / meter / sensor is monitored by the SNMPv1/v2c/v3 compliant Didactum unit with its integrated powerful virtual sensor features. Here you can define individual thresholds and notifications.
Important note from the editors:
The installation of this Modbus AC Smart Meter must only be carried out by a qualified electrical specialist or a specialized electrical company.
Typical applications of this Modbus AC Smart Energy Meter include:
- Remote measurement and monitoring of current and voltage (AC alternating current)
- Remote reading of electricity meters via TCP / IP network or Internet
- Remote power consumption measurement with Network-Management-System (Nagios, Icinga2, MS SCOM, CA Unitcenter, IBM Tivioli, HP OpenView, Check MK, WhatsUp Gold, Zabbix)
- Billing of power consumption for colocation providers
- Electricity billing as part of cost center accounting
- Remote energy cost accounting in apartment building, workshop, clubs, etc.
Features Modbus AC meter 1-phase 2-wire:
- Measurement of kWh, KVA, KVARH, KW, KVA, PF, Hz, V and A
- Illuminated LCD display on the front panel for convenient operation
- RS485 Modbus interface for Didactum remote measurement and monitoring units
- S0 interface for the export of energy consumption
- DIN rail mounting (35 mm)
- Class 1 IEC62053-21 and Class B EN50470-3
- IP51 housing
- MID approved
Informasi Tambahan
Berat | 1 kg |
---|---|
produk |
Barang |
merek | |
kondisi |
Baru |
jenis-sensor |
Sensor Tegangan Listrik AC |
Ulasan (0)
Dinilai 0 dari 5
0 reviews
Dinilai 5 dari 5
0
Dinilai 4 dari 5
0
Dinilai 3 dari 5
0
Dinilai 2 dari 5
0
Dinilai 1 dari 5
0
Jadilah yang pertama memberikan ulasan “Didactum 14702 Modbus AC Smart Meter” Batalkan balasan
Anda harus login untuk mengirimkan ulasan.
Tentang DIDACTUM
Didactum® Ltd. Deutschland is a value added distributor of high availability monitoring products.
The core mission of Didactum® is the planning and integration of proactive SNMP-based environmental and security solutions.
Informasi Pengiriman
SYARAT & KETENTUAN BERBELANJA
- Biasakan Sebelum ORDER barang untuk tanya stock barang karena perputaran barang sangat cepat.
- Ongkos untuk pengiriman dan retur barang (komplain) sepenuhnya ditanggung oleh pembeli
- Barang yang sudah dibeli tidak dapat ditukar atau dikembalikan dengan alasan apapun.
- Jika tidak ada keterangan warna yang dipilih, maka barang dikirim secara acak.
- Semua barang yang dijual di toko online kami adalah 100% baru.
- Seluruh barang yang dikirim sudah dipastikan tidak ada kerusakan/cacat.
- Pengemasan barang kiriman akan dilakukan seaman mungkin.
- Jika terjadi kerusakan barang yang disebabkan oleh pihak pengiriman, adalah diluar tanggung jawab kami.
JADWAL WAKTU & INPUT NOMOR RESI PENGIRIMAN
- Waktu pengiriman : Senin - Jumat Pukul 16.00 WIB (Khusus Yes Pukul 15.00 WIB)& Sabtu Pukul 15.00 WIB.
- Pemesanan yang masuk sebelum pukul 16.00 WIB, akan dikirim pada hari yang sama.
- Pemesanan yang masuk melewati pukul 16.00 WIB, akan dikirim pada hari berikutnya.
- Nomer resi pengiriman akan input pada malam hari sekitar pukul 21.00 -24.00 WIB / pada keesokan harinya.

SKU:
2024588097991
Kategori: Sensor EMS
Produk Terkait
NTI E-CDx-y Chemical Detection Sensor
Rp 2.542.500
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-CDx-y Chemical Detection Sensor
- For detecting the presence of chemical liquid.
- Reliably senses acids, bases, and other conductive liquids.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- Chemical resistant – cable functions normally after seven-day exposure to:
- Fresh deionized water
- Tap water
- Sulfuric acid, H2SO4 (98%)
- Sulfuric acid, H2SO4 (50%)
- Hydrochloric acid, HCl (37%)
- Sodium hydroxide, NaOH (10%)
- Aqua regia, HNO3+3 HCl
- Ethylene glycol, C2H6O2 (60% in DI water)
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available chemical sensor cable (x) lengths: 1/10/50/100 feet.
- 100% waterproof
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) – supports up to 1,000 feet (305 meters).
- Regulatory approvals: CE, RoHS
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation.
NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
Rp 1.080.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
- For detecting water presence and warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Water sensor cable cannot be in contact with any conductive surfaces or overlap on itself.
- Minimum puddle: 0.06" (1.5 mm) diameter.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600 feet.
- Material: PVC twisted pair with stainless 316 elements
- Diameter: 0.14" (3.5 mm)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
NTI E-LDx-y Liquid Detection Sensor, Plenum Rope-Style
Rp 1.890.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-LDx-y Liquid Detection Sensor, Plenum Rope-Style
- For detecting water presence and warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Minimum puddle: 0.6" (15 mm) diameter.
- Detects liquid depth >0.1" (2.5 mm).
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Bend radius: 0.375 in (9.53 mm)
- Operating temperature: 32 to 167°F (0 to 75°C).
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Insulation and Outer Jacket Material: Plenum Grade PVC
- Diameter: 0.111 in (2.82 mm)
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Regulatory approvals: CE, RoHS
- MTBF: 10,869,188 hrs
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation
NTI E-LLDC-xx Liquid Location Detection Sensor Cable
Rp 6.165.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-LLDC-xx Liquid Location Detection Sensor Cable
- For detecting water presence at a specific location.
- 100% waterproof electronics.
- Detects any conductive liquid.
- Minimum puddle: 0.6" (15 mm) diameter.
- Detects liquid depth >0.1" (2.5 mm).
- M12 4-pin connectors.
- Available lengths: 10/25/50/100 feet and custom lengths up to 4,000 feet.
- Contact an NTI product consultant for custom cable lengths
- Bend radius: 0.375" (9.53 mm)
- Operating temperature: 32 to 167°F (0 to 75°C).
- Regulatory approvals: CE, RoHS
- MTBF: 10,869,188 hrs
- Compatible with E-ALDS Addressable Leak Detection Sensor.
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation
NTI E-RTDS-MP482 Mini Probe 100 Ohm RTD Sensor
Rp 2.025.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-RTDS-MP482 Mini Probe 100 Ohm RTD Sensor
- Applications from -319 to 482°F (-195 to 250°C).
- Accurate to within ±0.27% x°F (±0.15% x°C).
- Probe size: 0.12" (3 mm) round x 0.79" (20 mm) long stainless steel housing.
- Cable length: 3.28 ft (1 m) 4-wire lead.
- PT100, Type A, 385 curve
- Requires the E-RTDT-1562 to operate with the E-2D/5D/16D.
NTI E-STHS-LCDW Temperature/Humidity Sensor with 3-Digit 7-Segment LCD Display
Rp 10.800.000
Dinilai 0 dari 5
- Use to detect and view real-time value of the sensor's temperature or humidity reading.
- Three-digit, seven-segment display with °F, °C and % indicators.
- Character height: 2 in (50mm).
- LCD display window dimensions WxH: 6.88x2.29 in (175x58mm).
- Use the touch-sensitive Mode button on the LCD display to alternate between temperature and humidity.
- Use the touch-sensitive Light button to activate an LED backlight for a clear view in dark environments.
- Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% non-condensing relative humidity.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Wall mountable.
- Dimensions WxDxH: 8x1.03x5.4 in (203x26x137 mm).
- Supports CAT5/5e/6/6a cable (24 AWG) up to 150 ft (45.7 m) (not included).
- If a longer cable is used (up to 1,000 ft), the MODE button will not work when the display is illuminated by the LIGHT button.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Max current consumption: 56mA @ 5VDC
- Powered by E-2D/5D/16D.
- MTBF: 3,491,762 hours
- Communication type: RS485
- Regulatory approvals:
- CE, RoHS.
- TAA compliant.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.
NTI E-STHSB Temperature/Humidity/Dew Point Sensor
Rp 4.500.000
Dinilai 0 dari 5
- Applications from -4 to 185°F (-20 to 85°C) and 0 to 90% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- ±1.62°F (±0.90°C) for 140 to 185°F (60 to 85°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- RJ45 connector.
- Voltage supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- MTBF: 4,134,102 hours
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STSM-E7 Probe-Style Temperature Sensor
Rp 2.475.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-STSM-E7 Probe-Style Temperature Sensor
- For use with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Applications from -4 to 140°F (-20 to 60°C).
- High resistance to external influences on the cable due to digital output signal.
Ulasan
Clear filtersBelum ada ulasan.