Didactum 14703 Modbus multifunction three-phase current meter 3P 4TE
0 Terjual
Rp 11.974.887
This smart multifunction three-phase energy meter can be used in 3-phase 4-wire (3p4w), 3-phase 3-wire (3p3w) and 1-phase 1-wire (1p2w) electricity networks. The energy meter is operated via multifunction keys.
0
People watching this product now!
Deskripsi produk
Spesialis Elektronik – Didactum 14703 Modbus multifunction three-phase current meter 3P 4TE
This smart multifunction three-phase energy meter can be used in 3-phase 4-wire (3p4w), 3-phase 3-wire (3p3w) and 1-phase 1-wire (1p2w) electricity networks. The energy meter is operated via multifunction keys. The multi-line display shows the energy consumption data such as PF, kWh, kW, kVAr, kVArh, kVA, THD%, among others. The configuration settings of the energy meter are of course password-protected. The Modbus RTU-capable multifunction energy meter is mounted on a DIN top-hat rail.
Typical applications of the 3-phase multi-function three-phase meter
- Remote measurement and remote monitoring of mains voltage
- Measurement of the percentage harmonic distortion of the total voltage (THD%) on all phases
- Measurement of active and reactive energy (kW / kVAr)
- Measurement of real power, apparent power and reactive power
This smart energy meter is equipped with a Modbus RTU interface and can therefore be used with Didactum’s TCP / IP based remote measurement and remote monitoring devices. Please note that the Didactum device must be equipped with the optionally available Modbus RTU module or Modbus adapter. The energy meter connected via RS486 Modbus RTU can thus be permanently read out and monitored remotely with Didactum’s SNMP-compatible remote measurement and control systems.
The measured power output and power quality parameters can be remotely transmitted to SNMP compatible measurement data or automation software or also to network monitoring tools (Nagios, check MK, Icinga, OpenNMS, PRTG, Zabbix). In addition, this smart electricity meter is equipped with 2 S0 pulse outputs.
Important notice:
The installation of this multi-function three-phase current meter may only be carried out by a competent person (electrician / electrical contractor).
Features
- Suitable for: all with RS485 Modbus RTU Modul equipped Didactum Monitoring Systems
- Measuring range: 0-120A
- Measurement accuracy: 1%
- Insulated construction up to 2.5 kV
- Power consumption: 12V DC, 1A
- Connection via RJ11 patch cable to any IP measuring device from Didactum
- Automatic recognition of the sensor by all Ethernet coupled Didactum IP data loggers
- Permissible operating environment: -10°C to +85°C at 5 to max 95% relative humidity (non-condensing)
- Measurements: 68 x 47 x 26 mm
- Integrated sensor OID for SNMP tools and SNMP compatible SCADA software
- Weight: 0.165 kg
- Made in EU
Scope of delivery: Sensor for DC transmitter. Suitable for all Ethernet-supported measuring and alarm systems from Didactum. 2 metre RJ11 patch cable included. Supplied without DC transducer. Please order separately from Didactum.
Customs tariff number: 9030 33 100
Informasi Tambahan
| Berat | 1 kg |
|---|---|
| produk |
Barang |
| merek | |
| kondisi |
Baru |
| jenis-sensor |
Sensor Tegangan Listrik AC |
Ulasan (0)
Anda harus login untuk mengirimkan ulasan.
Tentang DIDACTUM
Didactum® Ltd. Deutschland is a value added distributor of high availability monitoring products.
The core mission of Didactum® is the planning and integration of proactive SNMP-based environmental and security solutions.
Informasi Pengiriman
SYARAT & KETENTUAN BERBELANJA
- Biasakan Sebelum ORDER barang untuk tanya stock barang karena perputaran barang sangat cepat.
- Ongkos untuk pengiriman dan retur barang (komplain) sepenuhnya ditanggung oleh pembeli
- Barang yang sudah dibeli tidak dapat ditukar atau dikembalikan dengan alasan apapun.
- Jika tidak ada keterangan warna yang dipilih, maka barang dikirim secara acak.
- Semua barang yang dijual di toko online kami adalah 100% baru.
- Seluruh barang yang dikirim sudah dipastikan tidak ada kerusakan/cacat.
- Pengemasan barang kiriman akan dilakukan seaman mungkin.
- Jika terjadi kerusakan barang yang disebabkan oleh pihak pengiriman, adalah diluar tanggung jawab kami.
JADWAL WAKTU & INPUT NOMOR RESI PENGIRIMAN
- Waktu pengiriman : Senin - Jumat Pukul 16.00 WIB (Khusus Yes Pukul 15.00 WIB)& Sabtu Pukul 15.00 WIB.
- Pemesanan yang masuk sebelum pukul 16.00 WIB, akan dikirim pada hari yang sama.
- Pemesanan yang masuk melewati pukul 16.00 WIB, akan dikirim pada hari berikutnya.
- Nomer resi pengiriman akan input pada malam hari sekitar pukul 21.00 -24.00 WIB / pada keesokan harinya.
Produk Terkait
NTI E-CDx-y Chemical Detection Sensor
Spesialis Elektronik – NTI E-CDx-y Chemical Detection Sensor
- For detecting the presence of chemical liquid.
- Reliably senses acids, bases, and other conductive liquids.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- Chemical resistant – cable functions normally after seven-day exposure to:
- Fresh deionized water
- Tap water
- Sulfuric acid, H2SO4 (98%)
- Sulfuric acid, H2SO4 (50%)
- Hydrochloric acid, HCl (37%)
- Sodium hydroxide, NaOH (10%)
- Aqua regia, HNO3+3 HCl
- Ethylene glycol, C2H6O2 (60% in DI water)
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available chemical sensor cable (x) lengths: 1/10/50/100 feet.
- 100% waterproof
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) – supports up to 1,000 feet (305 meters).
- Regulatory approvals: CE, RoHS
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation.
NTI E-LDSx-y Legacy Liquid Detection Rope Sensor
Spesialis Elektronik – NTI E-LDSx-y Legacy Liquid Detection Rope Sensor
- For detecting water presence and warning of flooding.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- 100% waterproof electronics.
- Detects any liquid or moisture, except deionized water.
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- RJ45 connector.
- Voltage Supply: 12VDC
- Current Consumption: 20mA
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Bend radius: 0.375" (9.53 mm)
- Plenum rating: CL2P (UL)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Powered by E-SEMS-16U and SERIMUX-S-x.
- Regulatory approvals: CE, RoHS
- Requires the E-SEMS-16U and SERIMUX-S-x to operate.
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifing after installation
NTI E-LDx-y Liquid Detection Sensor, Plenum Rope-Style
Spesialis Elektronik – NTI E-LDx-y Liquid Detection Sensor, Plenum Rope-Style
- For detecting water presence and warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Minimum puddle: 0.6" (15 mm) diameter.
- Detects liquid depth >0.1" (2.5 mm).
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Bend radius: 0.375 in (9.53 mm)
- Operating temperature: 32 to 167°F (0 to 75°C).
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Insulation and Outer Jacket Material: Plenum Grade PVC
- Diameter: 0.111 in (2.82 mm)
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Regulatory approvals: CE, RoHS
- MTBF: 10,869,188 hrs
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation
NTI E-RTDS-A1112 All-Purpose 100 Ohm RTD Sensor
Spesialis Elektronik – NTI E-RTDS-A1112 All-Purpose 100 Ohm RTD Sensor
- Precision sensor with 316 stainless steel probe.
- Applications from -328 to 1112°F (-200 to 600°C).
- Accurate to within ±0.27°F (±0.15°C) for -148 to 842°F (-100 to 450°C).
- Probe size: 6 in (152 mm)
- Cable length: 40 in (1.02 m) 4-wire lead.
- Lead wire max temperature: 482°F (250°C)
- 100 Ohm Pt 385 curve.
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-STHSB-D Temperature/Humidity/Dew Point Sensor, DIN Mounted
- Applications from -4 to 185°F (-20 to 85°C) and 0 to 90% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- ±1.62°F (±0.90°C) for 140 to 185°F (60 to 85°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- DIN mountable
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STHSM-E7 Probe-Style Temperature/Humidity/Dew Point Sensor
- For use with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% relative humidity (operating and storage).
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1000 feet (305 m) using CATx cable (minimum 24AWG).
- MTBF: 4,195,068 hours.
- Current consumption: 7mA @5VDC.
- Powered by E-2D/5D/16D.
- Communication type: RS485
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.
NTI E-STS-O IP65 Outdoor Temperature Sensor
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±0.9°F (±0.5°C).
- Weatherproof enclosure.
- IP65-rated water and dust protection.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Quick release waterproof RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- Dimensions WxDxH (in): 4.53x2.56x2.13 (115x65x54 mm).
- MTBF: 1,860,032 hours.
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STSP-SL-7 Strap-On Pipe Temperature Sensor
- Mount to the outside of an insulated metal pipe (up to 1/4" wall).
- Cable ties secure sensor to pipe diameters from 5" up to 14".
- Mounts with insulation thicknesses from 0.5" - 2.5".
- Copper contact transmits surface temperature to thermal sensor.
- Spring-loaded contact enables minimal removal of pipe insulation.
- NEMA 1 and IP20 rated metal enclosure
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- MTBF: 3,540,911 hours.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Ulasan
Clear filtersBelum ada ulasan.