Didactum 14451 Ammeter 20A AC
Rp 4.534.914
This ammeter is used to measure and monitor AC current and is suitable for the latest generation of Didactum IP-based remote measuring and monitoring units. It is supplied with a CT (Current Transformer) and a associated sensor unit to measure AC current in the range of 0.01A to 20A.
Spesialis Elektronik – Didactum 14451 Ammeter 20A AC
This ammeter is used to measure and monitor AC current and is suitable for the latest generation of Didactum IP-based remote measuring and monitoring units. It is supplied with a CT (Current Transformer) and a associated sensor unit to measure AC current in the range of 0.01A to 20A.
Installation of the ammeter
The supplied Current Transformer is installed in a non-invasive manner. When installing this CT converter no power cable must be disconnected and stripped. The converter is simply opened and the single-phase, live cable is inserted there. Subsequently, the CT converter case is closed again. Then the green connector of the CT converter is connected to the sensor unit. This unit is then connected to the 2 meter long sensor cable with a free analogue sensor port of the networked remote measurement and monitoring system (to be ordered separately).
Thanks to the innovative Auto Sensing function, this IP-based measuring and monitoring system from Didactum recognizes this sensor automatically. You can then configure the ammeter individually in the English-language web interface. The sensor data is stored in the built-in datalogger. The measured values recorded in real time can be displayed graphically in the web interface and also be loaded directly from the IP-based remote measuring and monitoring system via CSV or XML data export.
Notifications, warnings, and alerts
Simply set individual threshold and alarm values for the ammeter in the web interface of the Didactum Monitoring System. After that, you can easily create the desired notifications, warning and alarm functions, such as e-mail, SMS (via GSM / LTE modem or Web to SMS gateway). Optionally, this networked remote monitoring system can also signal the alert by siren with built-in flash function (optional equipment).
Integration of the ammeter into Network-Management-Software
All Didactum monitoring devices support the SNMP protocols v1, v2c and v3 (encrypted). Each IP sensor from Didactum has its own SNMP OID for direct reading via LAN / WAN. The required Didactum MIB can be loaded directly from the web interface of the monitoring system and integrated into SNMP-compatible DCIM software and network management software (Nagios, check_MK, Observium, OpenNMS, PRTG, Zabbix, etc.). Also open source tools like Cacti or RRDtool are supported.
Note from the technical editor: On request, this ammeter can also measure alternating current up to 100A. Please contact our sales staff.
Features
- Suitable for: all Didactum SNMP measuring and monitoring devices
- Sensor Type: Current Transformer (CT)
- Max AC: 0.01 to 20 A (optional also for 100A)
- Offset voltage: 2.5V
- Input impedance: 20 ohms
- Dimensions (LxHxB): 1.9 x 2.9 x 1.9 cm
- Weight: 0.152 kg
Sensor unit:
- Supply voltage: 9-12VDC (power supply via monitoring system)
- Connections: 1x RJ11 connector for sensor cable, 1x 2-core terminal for current transformer
- Maximum input current: 25mA (on request also up to 50mA)
- Permissible operating environment: -10 ° C to max. + 85 ° C at 5% to max. 95% relative humidity (non-condensing)
- Max. Distance sensor unit to the monitoring system: 50 meters
- Auto Identification / Disconnect Alarm: Yes / Yes
- SNMP OID: Yes. Sensor unit can be queried via SNMP.
- Dimensions: 11 x 5.3 x 2.7 cm
- Weight: 0.126 kg (net)
- HS Code: 903033100
- Made in: EU
Delivery: Ammeter 20A AC for Didactum IP-based remote measuring and monitoring systems. Scope of delivery: 1x sensor unit, 1x 2m sensor cable, mounting material and CT type current transformer. Didactum Monitoring System not included. Please order separately
| Berat | 1 kg |
|---|---|
| produk |
Barang |
| merek | |
| kondisi |
Baru |
| jenis-sensor |
Sensor Magnetik |
Anda harus login untuk mengirimkan ulasan.
Didactum® Ltd. Deutschland is a value added distributor of high availability monitoring products.
The core mission of Didactum® is the planning and integration of proactive SNMP-based environmental and security solutions.
SYARAT & KETENTUAN BERBELANJA
- Biasakan Sebelum ORDER barang untuk tanya stock barang karena perputaran barang sangat cepat.
- Ongkos untuk pengiriman dan retur barang (komplain) sepenuhnya ditanggung oleh pembeli
- Barang yang sudah dibeli tidak dapat ditukar atau dikembalikan dengan alasan apapun.
- Jika tidak ada keterangan warna yang dipilih, maka barang dikirim secara acak.
- Semua barang yang dijual di toko online kami adalah 100% baru.
- Seluruh barang yang dikirim sudah dipastikan tidak ada kerusakan/cacat.
- Pengemasan barang kiriman akan dilakukan seaman mungkin.
- Jika terjadi kerusakan barang yang disebabkan oleh pihak pengiriman, adalah diluar tanggung jawab kami.
JADWAL WAKTU & INPUT NOMOR RESI PENGIRIMAN
- Waktu pengiriman : Senin - Jumat Pukul 16.00 WIB (Khusus Yes Pukul 15.00 WIB)& Sabtu Pukul 15.00 WIB.
- Pemesanan yang masuk sebelum pukul 16.00 WIB, akan dikirim pada hari yang sama.
- Pemesanan yang masuk melewati pukul 16.00 WIB, akan dikirim pada hari berikutnya.
- Nomer resi pengiriman akan input pada malam hari sekitar pukul 21.00 -24.00 WIB / pada keesokan harinya.
Produk Terkait
NTI E-CDx-y Chemical Detection Sensor
- For detecting the presence of chemical liquid.
- Reliably senses acids, bases, and other conductive liquids.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- Chemical resistant – cable functions normally after seven-day exposure to:
- Fresh deionized water
- Tap water
- Sulfuric acid, H2SO4 (98%)
- Sulfuric acid, H2SO4 (50%)
- Hydrochloric acid, HCl (37%)
- Sodium hydroxide, NaOH (10%)
- Aqua regia, HNO3+3 HCl
- Ethylene glycol, C2H6O2 (60% in DI water)
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available chemical sensor cable (x) lengths: 1/10/50/100 feet.
- 100% waterproof
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) – supports up to 1,000 feet (305 meters).
- Regulatory approvals: CE, RoHS
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation.
NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
- For detecting water presence and warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Water sensor cable cannot be in contact with any conductive surfaces or overlap on itself.
- Minimum puddle: 0.06" (1.5 mm) diameter.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600 feet.
- Material: PVC twisted pair with stainless 316 elements
- Diameter: 0.14" (3.5 mm)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
NTI E-RTDS-A221 All-Purpose 100 Ohm RTD Sensor
- Rugged, point-sensitive waterproof sensor with 304 stainless steel probe and brass fitting.
- Applications from -67 to 221°F (-55 to 105°C).
- Accurate to within ±0.27°F (±0.15°C).
- Probe size: 9" (229 mm)
- Brass fitting with 1/2" NPT male thread.
- Cable length: 18" (457 mm) 2-wire lead.
- 100 Ohm Pt 385 curve.
- Suitable for plenum mounting, duct mounting, immersion wells, or outside air.
- Regulatory approvals: CE
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-STS Temperature Sensor
- Applications from 32 to 122°F (0 to 50°C).
- Accurate to within ±0.9°F (±0.5°C).
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- MTBF: 3,784,839 hours.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STS-O IP65 Outdoor Temperature Sensor
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±0.9°F (±0.5°C).
- Weatherproof enclosure.
- IP65-rated water and dust protection.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Quick release waterproof RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- Dimensions WxDxH (in): 4.53x2.56x2.13 (115x65x54 mm).
- MTBF: 1,860,032 hours.
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STSM-E7 Probe-Style Temperature Sensor
- For use with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Applications from -4 to 140°F (-20 to 60°C).
- High resistance to external influences on the cable due to digital output signal.
NTI E-STSP-7 Pipe Temperature Sensor
- Mount to the outside of a thin walled steel, copper, or aluminum pipe (up to 1/4" wall).
- Copper contact transmits surface temperature to thermal sensor.
- Weatherproof enclosure designed to IP65 specifications.
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- MTBF: 3,540,911 hours.
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Self centering mounting bracket available for 1-3" (25 mm) diameter pipe, and 3-6.5" (76 mm) diameter pipe (included).
- Included adjustable cable ties secure mounting bracket to pipe.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STSP-SL-7 Strap-On Pipe Temperature Sensor
- Mount to the outside of an insulated metal pipe (up to 1/4" wall).
- Cable ties secure sensor to pipe diameters from 5" up to 14".
- Mounts with insulation thicknesses from 0.5" - 2.5".
- Copper contact transmits surface temperature to thermal sensor.
- Spring-loaded contact enables minimal removal of pipe insulation.
- NEMA 1 and IP20 rated metal enclosure
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- MTBF: 3,540,911 hours.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Ulasan
Clear filtersBelum ada ulasan.