Beranda / Toko / EMS / Sensor EMS / NTI E-WFS-GE Hall Effect Liquid Water Flow Sensor Switch
NTI E-WFS-GE Hall Effect Liquid Water Flow Sensor Switch
0 Terjual
Rp 2.250.000
- Use to monitor water usage and to detect leaks/stoppages.
- Pulse frequency output is linearly related to flow rate.
- Note: This is not a precision sensor – the pulse rate varies some depending on the flow rate, fluid pressure, and sensor orientation.
- Rugged brass construction.
- Sensor Type: Hall effect
- Working Voltage: 4.5 to 18V DC
- Max Current Draw: 10mA at 5VDC
- Available with G1/2 or G3/4 external thread diameter.
- E-WFS-GD44
- Working Flow Rate: 1 to 30 L/min
- When used with E-xD, the flow rate is 1 to 26.18 L/min
- Flow Rate Pulse Characteristics: Frequency (Hz) = 11 x Flow Rate (L/min) – 3
- Accuracy: ±10%
- Thread Type: BSPP 1/2″ G (Male-to-Male)
- Dimensions (Outer) WxDxH(in): 1.07×0.95×1.73 (27x24x44 mm)
- Working Flow Rate: 1 to 30 L/min
- E-WFS-GE
- Working Flow Rate: 2 to 45 L/min
- When used with E-xD, the flow rate is 2 to 31.85 L/min
- Flow Rate Pulse Characteristics: Frequency (Hz) = 8.1 x Flow Rate (L/min) – 3
- Accuracy: ±10%
- Thread Type: BSPP 3/4″ G (Male-to-Male)
- Dimensions (Outer) WxDxH(in): 1.26×1.05×2.36 (32x27x60 mm)
- Working Flow Rate: 2 to 45 L/min
- E-WFS-GD44
- Maximum Water Pressure: 1.75 MPa (253 PSI)
- Output Duty Cycle: 50%
- Liquid Temperature: ≤60°C
- Cable Length: 5.12 in (130 mm)
- Pinout:
- Black: 0V / Ground
- Yellow: Pulse / Frequency flow rate output
- Red: VCC Power 5V ~ 18V
- Compatible with E-2D/5D/16D.
- Interfaces with the E-2D/5D/16D via the Tach screw terminals.
- Compatible with E-DI16DO(R)16 Digital Input/Output Expanders.
- Interfaces with the E-2D/5D/16D via the Tach screw terminals.
- Contact an NTI product consultant for water flow sensors with different specifications.
0
People watching this product now!
Deskripsi produk
Spesialis Elektronik – NTI E-WFS-GE Hall Effect Liquid Water Flow Sensor Switch
- Use to monitor water usage and to detect leaks/stoppages.
- Pulse frequency output is linearly related to flow rate.
- Note: This is not a precision sensor – the pulse rate varies some depending on the flow rate, fluid pressure, and sensor orientation.
- Rugged brass construction.
- Sensor Type: Hall effect
- Working Voltage: 4.5 to 18V DC
- Max Current Draw: 10mA at 5VDC
- Available with G1/2 or G3/4 external thread diameter.
- E-WFS-GD44
- Working Flow Rate: 1 to 30 L/min
- When used with E-xD, the flow rate is 1 to 26.18 L/min
- Flow Rate Pulse Characteristics: Frequency (Hz) = 11 x Flow Rate (L/min) – 3
- Accuracy: ±10%
- Thread Type: BSPP 1/2″ G (Male-to-Male)
- Dimensions (Outer) WxDxH(in): 1.07×0.95×1.73 (27x24x44 mm)
- Working Flow Rate: 1 to 30 L/min
- E-WFS-GE
- Working Flow Rate: 2 to 45 L/min
- When used with E-xD, the flow rate is 2 to 31.85 L/min
- Flow Rate Pulse Characteristics: Frequency (Hz) = 8.1 x Flow Rate (L/min) – 3
- Accuracy: ±10%
- Thread Type: BSPP 3/4″ G (Male-to-Male)
- Dimensions (Outer) WxDxH(in): 1.26×1.05×2.36 (32x27x60 mm)
- Working Flow Rate: 2 to 45 L/min
- E-WFS-GD44
- Maximum Water Pressure: 1.75 MPa (253 PSI)
- Output Duty Cycle: 50%
- Liquid Temperature: ≤60°C
- Cable Length: 5.12 in (130 mm)
- Pinout:
- Black: 0V / Ground
- Yellow: Pulse / Frequency flow rate output
- Red: VCC Power 5V ~ 18V
- Compatible with E-2D/5D/16D.
- Interfaces with the E-2D/5D/16D via the Tach screw terminals.
- Compatible with E-DI16DO(R)16 Digital Input/Output Expanders.
- Interfaces with the E-2D/5D/16D via the Tach screw terminals.
- Contact an NTI product consultant for water flow sensors with different specifications.
Informasi Tambahan
Berat | 1 kg |
---|---|
produk |
Barang |
merek | |
kondisi |
Baru |
jenis-sensor |
Sensor Cairan |
Ulasan (0)
Dinilai 0 dari 5
0 reviews
Dinilai 5 dari 5
0
Dinilai 4 dari 5
0
Dinilai 3 dari 5
0
Dinilai 2 dari 5
0
Dinilai 1 dari 5
0
Jadilah yang pertama memberikan ulasan “NTI E-WFS-GE Hall Effect Liquid Water Flow Sensor Switch” Batalkan balasan
Anda harus login untuk mengirimkan ulasan.
Tentang NTI
Network Technologies Inc (NTI), founded in 1984, is a leading manufacturer of high quality IT and A/V solutions. NTI products are used worldwide by leading companies in every industry, including manufacturing, retail, government, education, healthcare, financial services, entertainment, worship, broadcast, and telecommunications.
Informasi Pengiriman
SYARAT & KETENTUAN BERBELANJA
- Biasakan Sebelum ORDER barang untuk tanya stock barang karena perputaran barang sangat cepat.
- Ongkos untuk pengiriman dan retur barang (komplain) sepenuhnya ditanggung oleh pembeli
- Barang yang sudah dibeli tidak dapat ditukar atau dikembalikan dengan alasan apapun.
- Jika tidak ada keterangan warna yang dipilih, maka barang dikirim secara acak.
- Semua barang yang dijual di toko online kami adalah 100% baru.
- Seluruh barang yang dikirim sudah dipastikan tidak ada kerusakan/cacat.
- Pengemasan barang kiriman akan dilakukan seaman mungkin.
- Jika terjadi kerusakan barang yang disebabkan oleh pihak pengiriman, adalah diluar tanggung jawab kami.
JADWAL WAKTU & INPUT NOMOR RESI PENGIRIMAN
- Waktu pengiriman : Senin - Jumat Pukul 16.00 WIB (Khusus Yes Pukul 15.00 WIB)& Sabtu Pukul 15.00 WIB.
- Pemesanan yang masuk sebelum pukul 16.00 WIB, akan dikirim pada hari yang sama.
- Pemesanan yang masuk melewati pukul 16.00 WIB, akan dikirim pada hari berikutnya.
- Nomer resi pengiriman akan input pada malam hari sekitar pukul 21.00 -24.00 WIB / pada keesokan harinya.

SKU:
2043148830984
Kategori: Sensor EMS
Produk Terkait
NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
Rp 3.375.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
- For use in areas where E-LLDS-xx sensing cable is not required.
- Available lengths: 10/25/50/100 feet and custom lengths up to 1,000 feet.
- Contact an NTI product consultant for custom cable lengths
- M12 4-pin connectors.
- 22 AWG stranded bare copper conductors.
- Color-coded plenum-grade PVC insulation.
- Plenum-grade PVC jacket.
- Cable diameter: 0.136 in
- Operating temperature: 14 to 140°F (-10 to 60°C)
- Will ship in either white or gray.
- Regulatory approvals: CE, RoHS
- Compatible with E-ALDS Addressable Leak Detection Sensor and E-LLDC-xx Liquid Location Detection Sensor Cables.
NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
Rp 1.080.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
- For detecting water presence and warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Water sensor cable cannot be in contact with any conductive surfaces or overlap on itself.
- Minimum puddle: 0.06" (1.5 mm) diameter.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600 feet.
- Material: PVC twisted pair with stainless 316 elements
- Diameter: 0.14" (3.5 mm)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
NTI E-LD-SPDT Spot Liquid Detector, Point Leak Detection Sensor
Rp 11.925.000
Dinilai 0 dari 5
NTI E-LD-SPDT Spot Liquid Detector, Point Leak Detection Sensor
- For detecting water presence and warning of flooding.
- Features gold-plated probes and microchip technology for dependable detection of conductive liquids.
- SPDT alarm contacts
- Weatherproof enclosure
- LEDs for power and alarm indication
- Ideal solution for sensing leaks under a raised computer floor or air conditioning drip pans.
- Use in large-scale network control centers, data centers, server rooms/closets, unattended remote shelters, mechanical equipment rooms, sensitive areas with overhead piping, industrial process control rooms, etc.
- Adjustable detection level.
- Probe height adjustable 0" to 1.5" (0 to 38mm)
- Current consumption: 10mA typical, 30mA maximum @ 12VDC.
- Maximum cable length: 1000 ft (305m)
- Dimensions WxDxH: 3.75x4.5x4.23 in (95x114x107 mm)
- Powered by E-2D/5D/16D.
- Regulatory approvals: CE
NTI E-RTDS-ER230 Rugged Encapsulated 100 Ohm RTD Sensor
Rp 2.835.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-RTDS-ER230 Rugged Encapsulated 100 Ohm RTD Sensor
- Applications from -30°F to 230°F (-34°C to 110°C).
- Accurate to within ±0.6°F (±0.33°C).
- Probe size: 0.18" (4.57 mm) round, 0.50" (12.7 mm) long housing.
- Cable length: 8 feet (2.4 m) 24 AWG 2-wire leads
- 100 Ohm Pt 385 curve.
- Immune to the effects of moisture and condensation.
- Suitable for remote temperature sensing for building automation systems and mechanical equipment room instrumentation
- Small enough to be installed in most HVAC thermostat enclosures.
- Regulatory approvals: CE
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-RTDS-MP240 Mini Probe 100 Ohm RTD Sensor
Rp 2.025.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-RTDS-MP240 Mini Probe 100 Ohm RTD Sensor
- Applications from -67 to 240°F (-55 to 115°C).
- Accurate to within ±0.27°F (±0.15°C).
- Probe size: 0.19" (4.8 mm) round x 0.50" (13 mm) long stainless steel housing.
- Cable length: 18" (457 mm) 2-wire lead.
- 100 Ohm Pt 385 curve
- Regulatory approvals: CE
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-STHS-LCDW Temperature/Humidity Sensor with 3-Digit 7-Segment LCD Display
Rp 10.800.000
Dinilai 0 dari 5
- Use to detect and view real-time value of the sensor's temperature or humidity reading.
- Three-digit, seven-segment display with °F, °C and % indicators.
- Character height: 2 in (50mm).
- LCD display window dimensions WxH: 6.88x2.29 in (175x58mm).
- Use the touch-sensitive Mode button on the LCD display to alternate between temperature and humidity.
- Use the touch-sensitive Light button to activate an LED backlight for a clear view in dark environments.
- Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% non-condensing relative humidity.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Wall mountable.
- Dimensions WxDxH: 8x1.03x5.4 in (203x26x137 mm).
- Supports CAT5/5e/6/6a cable (24 AWG) up to 150 ft (45.7 m) (not included).
- If a longer cable is used (up to 1,000 ft), the MODE button will not work when the display is illuminated by the LIGHT button.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Max current consumption: 56mA @ 5VDC
- Powered by E-2D/5D/16D.
- MTBF: 3,491,762 hours
- Communication type: RS485
- Regulatory approvals:
- CE, RoHS.
- TAA compliant.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.
NTI E-STHS-LSH Fan-Aspirated Temperature/Humidity/Dew Point Sensor, Low Self-Heating
Rp 7.200.000
Dinilai 0 dari 5
- Fan-Aspirated Temperature/Humidity Sensor compensates for parasitic heating due to electrical power dissipation and/or exposure to solar radiation.
- Internal fan constantly draws air in over the sensor, providing highly accurate temperature readings.
- Ideal for installations where steep temperature gradients are common, and where there is little to no air flow.
- Use in freezers where there is intermittent air flow.
- Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% relative humidity.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- Inflation due to self-heating: <0.9°F (0.5°C) typical, 2.3°F (1.3°C) max.
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- Aspiration rate: 1 cfm (0.2 ft/s)
- Dimensions (including mounting brackets) WxDxH (in): 2.19x2.87x1.41 (56x73x36 mm)
- Communication type: RS485
- Compatible with E-2D/5D/16D.
- Powered by E-2D/5D/16D.
- Current consumption: 17mA @ 5VDC and 25mA@12VDC
- MTBF: 423,371 hours
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.
NTI E-STHSB-D Temperature/Humidity/Dew Point Sensor, DIN Mounted
Rp 4.950.000
Dinilai 0 dari 5
- Applications from -4 to 185°F (-20 to 85°C) and 0 to 90% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- ±1.62°F (±0.90°C) for 140 to 185°F (60 to 85°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- DIN mountable
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Ulasan
Clear filtersBelum ada ulasan.