NTI E-STSP-7 Pipe Temperature Sensor
Rp 5.895.000
NTI E-STS-O IP65 Outdoor Temperature Sensor
Rp 3.300.000
NTI E-STSP-SL-7 Strap-On Pipe Temperature Sensor
0 Terjual
Rp 13.050.000
- Mount to the outside of an insulated metal pipe (up to 1/4″ wall).
- Cable ties secure sensor to pipe diameters from 5″ up to 14″.
- Mounts with insulation thicknesses from 0.5″ – 2.5″.
- Copper contact transmits surface temperature to thermal sensor.
- Spring-loaded contact enables minimal removal of pipe insulation.
- NEMA 1 and IP20 rated metal enclosure
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- MTBF: 3,540,911 hours.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
0
People watching this product now!
Deskripsi produk
Spesialis Elektronik – NTI E-STSP-SL-7 Strap-On Pipe Temperature Sensor
- Mount to the outside of an insulated metal pipe (up to 1/4″ wall).
- Cable ties secure sensor to pipe diameters from 5″ up to 14″.
- Mounts with insulation thicknesses from 0.5″ – 2.5″.
- Copper contact transmits surface temperature to thermal sensor.
- Spring-loaded contact enables minimal removal of pipe insulation.
- NEMA 1 and IP20 rated metal enclosure
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- MTBF: 3,540,911 hours.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Informasi Tambahan
| Berat | 1 kg |
|---|---|
| produk |
Barang |
| merek | |
| kondisi |
Baru |
| jenis-sensor |
Sensor Suhu |
Ulasan (0)
Anda harus login untuk mengirimkan ulasan.
Tentang NTI
Network Technologies Inc (NTI), founded in 1984, is a leading manufacturer of high quality IT and A/V solutions. NTI products are used worldwide by leading companies in every industry, including manufacturing, retail, government, education, healthcare, financial services, entertainment, worship, broadcast, and telecommunications.
Informasi Pengiriman
SYARAT & KETENTUAN BERBELANJA
- Biasakan Sebelum ORDER barang untuk tanya stock barang karena perputaran barang sangat cepat.
- Ongkos untuk pengiriman dan retur barang (komplain) sepenuhnya ditanggung oleh pembeli
- Barang yang sudah dibeli tidak dapat ditukar atau dikembalikan dengan alasan apapun.
- Jika tidak ada keterangan warna yang dipilih, maka barang dikirim secara acak.
- Semua barang yang dijual di toko online kami adalah 100% baru.
- Seluruh barang yang dikirim sudah dipastikan tidak ada kerusakan/cacat.
- Pengemasan barang kiriman akan dilakukan seaman mungkin.
- Jika terjadi kerusakan barang yang disebabkan oleh pihak pengiriman, adalah diluar tanggung jawab kami.
JADWAL WAKTU & INPUT NOMOR RESI PENGIRIMAN
- Waktu pengiriman : Senin - Jumat Pukul 16.00 WIB (Khusus Yes Pukul 15.00 WIB)& Sabtu Pukul 15.00 WIB.
- Pemesanan yang masuk sebelum pukul 16.00 WIB, akan dikirim pada hari yang sama.
- Pemesanan yang masuk melewati pukul 16.00 WIB, akan dikirim pada hari berikutnya.
- Nomer resi pengiriman akan input pada malam hari sekitar pukul 21.00 -24.00 WIB / pada keesokan harinya.
Produk Terkait
NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
Spesialis Elektronik – NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
- For detecting water presence and warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Water sensor cable cannot be in contact with any conductive surfaces or overlap on itself.
- Minimum puddle: 0.06" (1.5 mm) diameter.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600 feet.
- Material: PVC twisted pair with stainless 316 elements
- Diameter: 0.14" (3.5 mm)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
NTI E-LDSx-y Legacy Liquid Detection Rope Sensor
Spesialis Elektronik – NTI E-LDSx-y Legacy Liquid Detection Rope Sensor
- For detecting water presence and warning of flooding.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- 100% waterproof electronics.
- Detects any liquid or moisture, except deionized water.
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- RJ45 connector.
- Voltage Supply: 12VDC
- Current Consumption: 20mA
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Bend radius: 0.375" (9.53 mm)
- Plenum rating: CL2P (UL)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Powered by E-SEMS-16U and SERIMUX-S-x.
- Regulatory approvals: CE, RoHS
- Requires the E-SEMS-16U and SERIMUX-S-x to operate.
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifing after installation
NTI E-RTDS-A1112 All-Purpose 100 Ohm RTD Sensor
Spesialis Elektronik – NTI E-RTDS-A1112 All-Purpose 100 Ohm RTD Sensor
- Precision sensor with 316 stainless steel probe.
- Applications from -328 to 1112°F (-200 to 600°C).
- Accurate to within ±0.27°F (±0.15°C) for -148 to 842°F (-100 to 450°C).
- Probe size: 6 in (152 mm)
- Cable length: 40 in (1.02 m) 4-wire lead.
- Lead wire max temperature: 482°F (250°C)
- 100 Ohm Pt 385 curve.
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-RTDS-MP240 Mini Probe 100 Ohm RTD Sensor
Spesialis Elektronik – NTI E-RTDS-MP240 Mini Probe 100 Ohm RTD Sensor
- Applications from -67 to 240°F (-55 to 115°C).
- Accurate to within ±0.27°F (±0.15°C).
- Probe size: 0.19" (4.8 mm) round x 0.50" (13 mm) long stainless steel housing.
- Cable length: 18" (457 mm) 2-wire lead.
- 100 Ohm Pt 385 curve
- Regulatory approvals: CE
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-RTDS-PAR540-xxIN Pipe 100 Ohm RTD Sensor with Adjustable Ring
Spesialis Elektronik – NTI E-RTDS-PAR540-xxIN Pipe 100 Ohm RTD Sensor with Adjustable Ring
- Monitor temperature on pipe surfaces.
- Applications from -58 to 540°F (-50 to 280°C).
- Accuracy:
- At 32°F (0°C), ±0.54°F (±0.3°C)
- At 212°F (100°C), ±1.44°F (±0.8°C)
- 100 Ohm Pt 385 curve.
- 6 ft (1.83 m) 3-wire lead.
- Adjustable ring to fit diameter of pipe.
- E-RTDS-PAR540-2IN: Fits 1.25" to 2" pipe diameter.
- E-RTDS-PAR540-6IN: Fits 2" to 6" pipe diameter.
- E-RTDS-PAR540-12IN: Fits 6" to 12" pipe diameter.
- Regulatory approvals: RoHS.
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-SLDO-IP68 IP68 Submersible Spot Liquid Detector
NTI E-SLDO-IP68 IP68 Submersible Spot Liquid Detector
- Use to detect fluids in confined areas, such as condensation drip pans.
- SPDT alarm contacts
- One generic relay output
- No exposed metal sensing posts – nothing to rust or corrode
- Potted electronics — functions when submerged in water
- Adjustable detection level.
- Probe height adjustable 0" to 0.75" (0 to 19mm)
- Dimensions WxDxH: 1.55x1.0x2.0 in (39x25x51 mm)
- Cable length: 14 feet
- E-SLDO-14 includes 24V/0.5A US power supply.
- E-SLDO-14-240VTR includes 240/208/120 to 24 VAC power transformer and country-specific line cord.
- Regulatory approvals: CE, RoHS
NTI E-STSM-E7 Probe-Style Temperature Sensor
Spesialis Elektronik – NTI E-STSM-E7 Probe-Style Temperature Sensor
- For use with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Applications from -4 to 140°F (-20 to 60°C).
- High resistance to external influences on the cable due to digital output signal.
NTI E-STSP-7 Pipe Temperature Sensor
- Mount to the outside of a thin walled steel, copper, or aluminum pipe (up to 1/4" wall).
- Copper contact transmits surface temperature to thermal sensor.
- Weatherproof enclosure designed to IP65 specifications.
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- MTBF: 3,540,911 hours.
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Self centering mounting bracket available for 1-3" (25 mm) diameter pipe, and 3-6.5" (76 mm) diameter pipe (included).
- Included adjustable cable ties secure mounting bracket to pipe.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Ulasan
Clear filtersBelum ada ulasan.