Beranda / Toko / EMS / Sensor EMS / NTI E-LLS-PF Plastic Vertical Liquid Level Float Switch
NTI E-LLS-PF Plastic Vertical Liquid Level Float Switch
0 Terjual
Rp 810.000
- Vertically mounted float switch – install in the top or bottom of the tank (inside of the tank).
- Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
- Single-pole single-throw (SPST) circuitry.
- Configure for normally open or normally closed circuit connection.
- When installed on top of the tank and used for sensing when liquid rises to a certain level (default setting), the sensor will be “normally closed” and will open when the liquid reaches that level.
- When installed on the bottom of the tank and used for sensing the drop in the liquid level beyond a certain point, the sensor will be “normally open” and will close when the liquid drops to that level.
- To change the default setting to “normally open”, simply remove the bottom clip; remove, flip and replace the float; and reinstall the clip.
- Configure for normally open or normally closed circuit connection.
- IP68-rated water and dust protection.
- Max pressure: 72.5 psi (0.5 MPa)
- Float specific gravity: 0.7
- Material:
- Float: PVDT
- Stem: PP
- Cable length: 15.75 in (40 cm)
- Wire gauge: 24 AWG
- Includes two gel-filled butt splice connectors for extending the cable length up to 1,000 feet.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor cables using the included butt splice connectors.
- Float Diameter: 0.75 in (19 mm)
- Stem length: 2 in (51 mm)
- Operating temperature: -4 to 176°F (-20 to 80°C).
- Electrical rating: AC 220V/1A; DC 24V/0.5A
- Mounting thread: M8x1.25
0
People watching this product now!
Deskripsi produk
Spesialis Elektronik – NTI E-LLS-PF Plastic Vertical Liquid Level Float Switch
- Vertically mounted float switch – install in the top or bottom of the tank (inside of the tank).
- Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
- Single-pole single-throw (SPST) circuitry.
- Configure for normally open or normally closed circuit connection.
- When installed on top of the tank and used for sensing when liquid rises to a certain level (default setting), the sensor will be “normally closed” and will open when the liquid reaches that level.
- When installed on the bottom of the tank and used for sensing the drop in the liquid level beyond a certain point, the sensor will be “normally open” and will close when the liquid drops to that level.
- To change the default setting to “normally open”, simply remove the bottom clip; remove, flip and replace the float; and reinstall the clip.
- Configure for normally open or normally closed circuit connection.
- IP68-rated water and dust protection.
- Max pressure: 72.5 psi (0.5 MPa)
- Float specific gravity: 0.7
- Material:
- Float: PVDT
- Stem: PP
- Cable length: 15.75 in (40 cm)
- Wire gauge: 24 AWG
- Includes two gel-filled butt splice connectors for extending the cable length up to 1,000 feet.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor cables using the included butt splice connectors.
- Float Diameter: 0.75 in (19 mm)
- Stem length: 2 in (51 mm)
- Operating temperature: -4 to 176°F (-20 to 80°C).
- Electrical rating: AC 220V/1A; DC 24V/0.5A
- Mounting thread: M8x1.25
Informasi Tambahan
Berat | 1 kg |
---|---|
produk |
Barang |
merek | |
kondisi |
Baru |
jenis-sensor |
Sensor Cairan |
Ulasan (0)
Dinilai 0 dari 5
0 reviews
Dinilai 5 dari 5
0
Dinilai 4 dari 5
0
Dinilai 3 dari 5
0
Dinilai 2 dari 5
0
Dinilai 1 dari 5
0
Jadilah yang pertama memberikan ulasan “NTI E-LLS-PF Plastic Vertical Liquid Level Float Switch” Batalkan balasan
Anda harus login untuk mengirimkan ulasan.
Tentang NTI
Network Technologies Inc (NTI), founded in 1984, is a leading manufacturer of high quality IT and A/V solutions. NTI products are used worldwide by leading companies in every industry, including manufacturing, retail, government, education, healthcare, financial services, entertainment, worship, broadcast, and telecommunications.
Informasi Pengiriman
SYARAT & KETENTUAN BERBELANJA
- Biasakan Sebelum ORDER barang untuk tanya stock barang karena perputaran barang sangat cepat.
- Ongkos untuk pengiriman dan retur barang (komplain) sepenuhnya ditanggung oleh pembeli
- Barang yang sudah dibeli tidak dapat ditukar atau dikembalikan dengan alasan apapun.
- Jika tidak ada keterangan warna yang dipilih, maka barang dikirim secara acak.
- Semua barang yang dijual di toko online kami adalah 100% baru.
- Seluruh barang yang dikirim sudah dipastikan tidak ada kerusakan/cacat.
- Pengemasan barang kiriman akan dilakukan seaman mungkin.
- Jika terjadi kerusakan barang yang disebabkan oleh pihak pengiriman, adalah diluar tanggung jawab kami.
JADWAL WAKTU & INPUT NOMOR RESI PENGIRIMAN
- Waktu pengiriman : Senin - Jumat Pukul 16.00 WIB (Khusus Yes Pukul 15.00 WIB)& Sabtu Pukul 15.00 WIB.
- Pemesanan yang masuk sebelum pukul 16.00 WIB, akan dikirim pada hari yang sama.
- Pemesanan yang masuk melewati pukul 16.00 WIB, akan dikirim pada hari berikutnya.
- Nomer resi pengiriman akan input pada malam hari sekitar pukul 21.00 -24.00 WIB / pada keesokan harinya.

SKU:
2029003941316
Kategori: Sensor EMS
Produk Terkait
NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
Rp 3.375.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
- For use in areas where E-LLDS-xx sensing cable is not required.
- Available lengths: 10/25/50/100 feet and custom lengths up to 1,000 feet.
- Contact an NTI product consultant for custom cable lengths
- M12 4-pin connectors.
- 22 AWG stranded bare copper conductors.
- Color-coded plenum-grade PVC insulation.
- Plenum-grade PVC jacket.
- Cable diameter: 0.136 in
- Operating temperature: 14 to 140°F (-10 to 60°C)
- Will ship in either white or gray.
- Regulatory approvals: CE, RoHS
- Compatible with E-ALDS Addressable Leak Detection Sensor and E-LLDC-xx Liquid Location Detection Sensor Cables.
NTI E-CDSx-y Legacy Chemical Detection Sensor
Rp 3.532.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-CDSx-y Legacy Chemical Detection Sensor
- For detecting the presence of chemical liquid.
- Reliably senses acids, bases, and other conductive liquids.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- Chemical resistant – cable functions normally after seven-day exposure to:
- Fresh deionized water
- Tap water
- Sulfuric acid, H2SO4 (98%)
- Sulfuric acid, H2SO4 (50%)
- Hydrochloric acid, HCl (37%)
- Sodium hydroxide, NaOH (10%)
- Aqua regia, HNO3+3 HCl
- Ethylene glycol, C2H6O2 (60% in DI water)
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
- Available chemical sensor cable (x) lengths: 1/10/50/100 feet.
- 100% waterproof
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) – supports up to 1,000 feet (305 meters).
- Powered by E-SEMS-16U or SERIMUX-S-x.
- Requires the E-SEMS-16U or SERIMUX-S-x to operate.
- " Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation.
NTI E-LDx-y Liquid Detection Sensor, Plenum Rope-Style
Rp 1.890.000
Dinilai 0 dari 5
Spesialis Elektronik – NTI E-LDx-y Liquid Detection Sensor, Plenum Rope-Style
- For detecting water presence and warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Minimum puddle: 0.6" (15 mm) diameter.
- Detects liquid depth >0.1" (2.5 mm).
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Bend radius: 0.375 in (9.53 mm)
- Operating temperature: 32 to 167°F (0 to 75°C).
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Insulation and Outer Jacket Material: Plenum Grade PVC
- Diameter: 0.111 in (2.82 mm)
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Regulatory approvals: CE, RoHS
- MTBF: 10,869,188 hrs
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation
NTI E-STHS-LSH Fan-Aspirated Temperature/Humidity/Dew Point Sensor, Low Self-Heating
Rp 7.200.000
Dinilai 0 dari 5
- Fan-Aspirated Temperature/Humidity Sensor compensates for parasitic heating due to electrical power dissipation and/or exposure to solar radiation.
- Internal fan constantly draws air in over the sensor, providing highly accurate temperature readings.
- Ideal for installations where steep temperature gradients are common, and where there is little to no air flow.
- Use in freezers where there is intermittent air flow.
- Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% relative humidity.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- Inflation due to self-heating: <0.9°F (0.5°C) typical, 2.3°F (1.3°C) max.
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- Aspiration rate: 1 cfm (0.2 ft/s)
- Dimensions (including mounting brackets) WxDxH (in): 2.19x2.87x1.41 (56x73x36 mm)
- Communication type: RS485
- Compatible with E-2D/5D/16D.
- Powered by E-2D/5D/16D.
- Current consumption: 17mA @ 5VDC and 25mA@12VDC
- MTBF: 423,371 hours
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.
NTI E-STHS-PRC Low-Cost Temperature/Humidity/Dew Point Sensor
Rp 11.250.000
Dinilai 0 dari 5
- Applications from 14 to 140°F ( -10 to 60°C) and 10 to 80% relative humidity.
- Accurate to within ±0.2°F (±0.1°C) and ±1.8% relative humidity.
- Supports dew point measurement.
- High resistance to external influences on the cable due to digital output signal.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STHSB Temperature/Humidity/Dew Point Sensor
Rp 4.500.000
Dinilai 0 dari 5
- Applications from -4 to 185°F (-20 to 85°C) and 0 to 90% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- ±1.62°F (±0.90°C) for 140 to 185°F (60 to 85°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- RJ45 connector.
- Voltage supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- MTBF: 4,134,102 hours
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STHSM-E7 Probe-Style Temperature/Humidity/Dew Point Sensor
Rp 3.240.000
Dinilai 0 dari 5
- For use with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% relative humidity (operating and storage).
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1000 feet (305 m) using CATx cable (minimum 24AWG).
- MTBF: 4,195,068 hours.
- Current consumption: 7mA @5VDC.
- Powered by E-2D/5D/16D.
- Communication type: RS485
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.
NTI E-STSP-SL-7 Strap-On Pipe Temperature Sensor
Rp 13.050.000
Dinilai 0 dari 5
- Mount to the outside of an insulated metal pipe (up to 1/4" wall).
- Cable ties secure sensor to pipe diameters from 5" up to 14".
- Mounts with insulation thicknesses from 0.5" - 2.5".
- Copper contact transmits surface temperature to thermal sensor.
- Spring-loaded contact enables minimal removal of pipe insulation.
- NEMA 1 and IP20 rated metal enclosure
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- MTBF: 3,540,911 hours.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Ulasan
Clear filtersBelum ada ulasan.