Didactum 14040 Gas Sensor / Gas Detector
Rp 7.129.986
Didactum 14046 Thermal Fire Detector
Rp 6.287.226
Didactum 14045 Multi Sensor Fire Detector
0 Terjual
Rp 6.286.962
A fire in a mission-critical infrastructure such as server room, production facility or logistics center can not only inflict the obvious fatal consequences on human life, but can also cause the complete destruction of your company’s ability to function.
0
People watching this product now!
Deskripsi produk
Spesialis Elektronik – Didactum 14045 Multi Sensor Fire Detector
A fire in a mission-critical infrastructure such as server room, production facility or logistics center can not only inflict the obvious fatal consequences on human life, but can also cause the complete destruction of your company’s ability to function. Frequently the most common causes of fires (in datacenters for example) are excessive heat due to technical defects in equipment, faulty electrical wiring and even negligence such as smoking.
In order to identify the threat quickly and prevent the spread of a fires the smoke needs to urgently be detected at an early stage. Therefore each and every room of a facility should be equipped with reliable smoke detectors that will help prevent disasters from fires. Smoke detectors should also be also installed in unmanned archives and cellar rooms in remote branch offices.
Easy installation of multi fire detector
This combined multi sensor f ire detector is easily installed on the ceiling.
This multi smoke and thermal sensor can also be mounted in network and server cabinets. Per two-wire cable this multi sensor fire detector is connected to the TCP/IP based Didactum remote monitoring unit (Dry Contact board Item no. 14027 with 16 inputs is necessary).
The easy-to-use web interface of the Didactum monitoring unit allows you to configure the multi- sensor fire detector quickly. Here you can easily define the notifications and alerts in case of fire or smoke detection. The Didactum IT monitoring series 500 and 500-DC can even automatically switch relays to alarm systems or building monitoring systems.
Notifications such as email or SMS alerts (Quad Band GSM modem required) are offered also. By sending SNMP traps to Building or Network Management Systems (eg Nagios, Icinga, OpenNMS, etc.), the ire alert can also be reported.
Features
- Integrated thermal sensor
- Alerting temperature: 60°C
- Maximum humidity: 95% RH
- Max Operating Temperature: -10 °C to +60 °C
- Integrated optical sensor (scattered light principle)
- Built-in LED light
- Supported areas: max. 110 square meters
- Protection class IP40
- supply voltage: 9-33 V DC
- Integrated relay output for connection to dry contact input of IP-based Didactum Remote
- Infrastructure Monitoring devices (16 Port Dry Contact Board required)
- Dimensions: 10.0 x 4.95 cm (D x H)
- HS-Code: 85319000
Delivery: Didactum Multi Sensor Fire Detector with relay output
Informasi Tambahan
| Berat | 1 kg |
|---|---|
| produk |
Barang |
| merek | |
| kondisi |
Baru |
| jenis-sensor |
Sensor Asap ,Sensor Suhu |
Ulasan (0)
Anda harus login untuk mengirimkan ulasan.
Tentang DIDACTUM
Didactum® Ltd. Deutschland is a value added distributor of high availability monitoring products.
The core mission of Didactum® is the planning and integration of proactive SNMP-based environmental and security solutions.
Informasi Pengiriman
SYARAT & KETENTUAN BERBELANJA
- Biasakan Sebelum ORDER barang untuk tanya stock barang karena perputaran barang sangat cepat.
- Ongkos untuk pengiriman dan retur barang (komplain) sepenuhnya ditanggung oleh pembeli
- Barang yang sudah dibeli tidak dapat ditukar atau dikembalikan dengan alasan apapun.
- Jika tidak ada keterangan warna yang dipilih, maka barang dikirim secara acak.
- Semua barang yang dijual di toko online kami adalah 100% baru.
- Seluruh barang yang dikirim sudah dipastikan tidak ada kerusakan/cacat.
- Pengemasan barang kiriman akan dilakukan seaman mungkin.
- Jika terjadi kerusakan barang yang disebabkan oleh pihak pengiriman, adalah diluar tanggung jawab kami.
JADWAL WAKTU & INPUT NOMOR RESI PENGIRIMAN
- Waktu pengiriman : Senin - Jumat Pukul 16.00 WIB (Khusus Yes Pukul 15.00 WIB)& Sabtu Pukul 15.00 WIB.
- Pemesanan yang masuk sebelum pukul 16.00 WIB, akan dikirim pada hari yang sama.
- Pemesanan yang masuk melewati pukul 16.00 WIB, akan dikirim pada hari berikutnya.
- Nomer resi pengiriman akan input pada malam hari sekitar pukul 21.00 -24.00 WIB / pada keesokan harinya.
Produk Terkait
NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
Spesialis Elektronik – NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
- For use in areas where E-LLDS-xx sensing cable is not required.
- Available lengths: 10/25/50/100 feet and custom lengths up to 1,000 feet.
- Contact an NTI product consultant for custom cable lengths
- M12 4-pin connectors.
- 22 AWG stranded bare copper conductors.
- Color-coded plenum-grade PVC insulation.
- Plenum-grade PVC jacket.
- Cable diameter: 0.136 in
- Operating temperature: 14 to 140°F (-10 to 60°C)
- Will ship in either white or gray.
- Regulatory approvals: CE, RoHS
- Compatible with E-ALDS Addressable Leak Detection Sensor and E-LLDC-xx Liquid Location Detection Sensor Cables.
NTI E-CDx-y Chemical Detection Sensor
Spesialis Elektronik – NTI E-CDx-y Chemical Detection Sensor
- For detecting the presence of chemical liquid.
- Reliably senses acids, bases, and other conductive liquids.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- Chemical resistant – cable functions normally after seven-day exposure to:
- Fresh deionized water
- Tap water
- Sulfuric acid, H2SO4 (98%)
- Sulfuric acid, H2SO4 (50%)
- Hydrochloric acid, HCl (37%)
- Sodium hydroxide, NaOH (10%)
- Aqua regia, HNO3+3 HCl
- Ethylene glycol, C2H6O2 (60% in DI water)
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available chemical sensor cable (x) lengths: 1/10/50/100 feet.
- 100% waterproof
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) – supports up to 1,000 feet (305 meters).
- Regulatory approvals: CE, RoHS
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation.
NTI E-RTDS-MP482 Mini Probe 100 Ohm RTD Sensor
Spesialis Elektronik – NTI E-RTDS-MP482 Mini Probe 100 Ohm RTD Sensor
- Applications from -319 to 482°F (-195 to 250°C).
- Accurate to within ±0.27% x°F (±0.15% x°C).
- Probe size: 0.12" (3 mm) round x 0.79" (20 mm) long stainless steel housing.
- Cable length: 3.28 ft (1 m) 4-wire lead.
- PT100, Type A, 385 curve
- Requires the E-RTDT-1562 to operate with the E-2D/5D/16D.
NTI E-RTDS-PAR540-xxIN Pipe 100 Ohm RTD Sensor with Adjustable Ring
Spesialis Elektronik – NTI E-RTDS-PAR540-xxIN Pipe 100 Ohm RTD Sensor with Adjustable Ring
- Monitor temperature on pipe surfaces.
- Applications from -58 to 540°F (-50 to 280°C).
- Accuracy:
- At 32°F (0°C), ±0.54°F (±0.3°C)
- At 212°F (100°C), ±1.44°F (±0.8°C)
- 100 Ohm Pt 385 curve.
- 6 ft (1.83 m) 3-wire lead.
- Adjustable ring to fit diameter of pipe.
- E-RTDS-PAR540-2IN: Fits 1.25" to 2" pipe diameter.
- E-RTDS-PAR540-6IN: Fits 2" to 6" pipe diameter.
- E-RTDS-PAR540-12IN: Fits 6" to 12" pipe diameter.
- Regulatory approvals: RoHS.
- Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
- E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
- E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
- E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).
NTI E-STHSB-D Temperature/Humidity/Dew Point Sensor, DIN Mounted
- Applications from -4 to 185°F (-20 to 85°C) and 0 to 90% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- ±1.62°F (±0.90°C) for 140 to 185°F (60 to 85°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- DIN mountable
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STHSM-E7 Probe-Style Temperature/Humidity/Dew Point Sensor
- For use with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% relative humidity (operating and storage).
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1000 feet (305 m) using CATx cable (minimum 24AWG).
- MTBF: 4,195,068 hours.
- Current consumption: 7mA @5VDC.
- Powered by E-2D/5D/16D.
- Communication type: RS485
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.
NTI E-STS Temperature Sensor
- Applications from 32 to 122°F (0 to 50°C).
- Accurate to within ±0.9°F (±0.5°C).
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- MTBF: 3,784,839 hours.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STSP-7 Pipe Temperature Sensor
- Mount to the outside of a thin walled steel, copper, or aluminum pipe (up to 1/4" wall).
- Copper contact transmits surface temperature to thermal sensor.
- Weatherproof enclosure designed to IP65 specifications.
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- MTBF: 3,540,911 hours.
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Self centering mounting bracket available for 1-3" (25 mm) diameter pipe, and 3-6.5" (76 mm) diameter pipe (included).
- Included adjustable cable ties secure mounting bracket to pipe.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Ulasan
Clear filtersBelum ada ulasan.