Didactum 14100 Sensor Transmitter for AC transducer
Rp 1.460.768
Didactum 14023 DC Monitor
Rp 4.534.914
Didactum 14016 AC Voltage Monitor
0 Terjual
Rp 4.534.914
The Didactum Sensor AC (alternating current) has been developed specifically for the network based surveillance of AC power. This highly reliable sensor monitors the AC voltage that is providing the critical power to your infrastructures.
0
People watching this product now!
Deskripsi produk
Spesialis Elektronik – Didactum 14016 AC Voltage Monitor
The Didactum Sensor AC (alternating current) has been developed specifically for the network based surveillance of AC power. This highly reliable sensor monitors the AC voltage that is providing the critical power to your infrastructures. This sensor is compatible with all Didactum Monitoring Systems
Easy installation and configuration
Simply connect the AC voltage sensor into any available 230V outlet then connect the RJ-12 cable (included) to one of the sensor ports on the Didactum Monitoring System. In the easy-to-use web interface of the Didactum monitoring base unit you can then set the desired parameters and alerts for each sensor individually. You can also measure and record the voltage with this sensor. In the Web GUI you can also display charts with the internal graphing function. These graphs allow you to view a visual impression of the stored measurement data which includes the quick evaluation of peak levels. Max. distance from the unit is 100 meters.
Typical applications for this sensor are:
- Alarm upon failure of the (AC) power supply’s
- Power supply monitoring of important AC loads
- Monitoring of voltage fluctuations in AC power supply’s
- Monitoring the quality of power supply’s
Embed Didactum sensors in network management systems (NMS)
All Didactum Monitoring Systems operate independently. You don´t need to install any software to use this network-based instrument. Thanks to the full SNMPv1 / v2c / v3 support the Didactum monitoring appliances can be integrated into most SNMP tools and network management systems (NMS). Also all SNMP-compatible automation and building monitoring software is supported by the Didactum surveillance technology. The necessary SNMP MIB files are included with all Didactum Monitoring Systems.
Informasi Tambahan
| Berat | 1 kg |
|---|---|
| produk |
Barang |
| merek | |
| kondisi |
Baru |
| jenis-sensor |
Sensor Tegangan Listrik AC |
Ulasan (0)
Anda harus login untuk mengirimkan ulasan.
Tentang DIDACTUM
Didactum® Ltd. Deutschland is a value added distributor of high availability monitoring products.
The core mission of Didactum® is the planning and integration of proactive SNMP-based environmental and security solutions.
Informasi Pengiriman
SYARAT & KETENTUAN BERBELANJA
- Biasakan Sebelum ORDER barang untuk tanya stock barang karena perputaran barang sangat cepat.
- Ongkos untuk pengiriman dan retur barang (komplain) sepenuhnya ditanggung oleh pembeli
- Barang yang sudah dibeli tidak dapat ditukar atau dikembalikan dengan alasan apapun.
- Jika tidak ada keterangan warna yang dipilih, maka barang dikirim secara acak.
- Semua barang yang dijual di toko online kami adalah 100% baru.
- Seluruh barang yang dikirim sudah dipastikan tidak ada kerusakan/cacat.
- Pengemasan barang kiriman akan dilakukan seaman mungkin.
- Jika terjadi kerusakan barang yang disebabkan oleh pihak pengiriman, adalah diluar tanggung jawab kami.
JADWAL WAKTU & INPUT NOMOR RESI PENGIRIMAN
- Waktu pengiriman : Senin - Jumat Pukul 16.00 WIB (Khusus Yes Pukul 15.00 WIB)& Sabtu Pukul 15.00 WIB.
- Pemesanan yang masuk sebelum pukul 16.00 WIB, akan dikirim pada hari yang sama.
- Pemesanan yang masuk melewati pukul 16.00 WIB, akan dikirim pada hari berikutnya.
- Nomer resi pengiriman akan input pada malam hari sekitar pukul 21.00 -24.00 WIB / pada keesokan harinya.
Produk Terkait
NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
Spesialis Elektronik – NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
- For use in areas where E-LLDS-xx sensing cable is not required.
- Available lengths: 10/25/50/100 feet and custom lengths up to 1,000 feet.
- Contact an NTI product consultant for custom cable lengths
- M12 4-pin connectors.
- 22 AWG stranded bare copper conductors.
- Color-coded plenum-grade PVC insulation.
- Plenum-grade PVC jacket.
- Cable diameter: 0.136 in
- Operating temperature: 14 to 140°F (-10 to 60°C)
- Will ship in either white or gray.
- Regulatory approvals: CE, RoHS
- Compatible with E-ALDS Addressable Leak Detection Sensor and E-LLDC-xx Liquid Location Detection Sensor Cables.
NTI E-LD-SPDT Spot Liquid Detector, Point Leak Detection Sensor
NTI E-LD-SPDT Spot Liquid Detector, Point Leak Detection Sensor
- For detecting water presence and warning of flooding.
- Features gold-plated probes and microchip technology for dependable detection of conductive liquids.
- SPDT alarm contacts
- Weatherproof enclosure
- LEDs for power and alarm indication
- Ideal solution for sensing leaks under a raised computer floor or air conditioning drip pans.
- Use in large-scale network control centers, data centers, server rooms/closets, unattended remote shelters, mechanical equipment rooms, sensitive areas with overhead piping, industrial process control rooms, etc.
- Adjustable detection level.
- Probe height adjustable 0" to 1.5" (0 to 38mm)
- Current consumption: 10mA typical, 30mA maximum @ 12VDC.
- Maximum cable length: 1000 ft (305m)
- Dimensions WxDxH: 3.75x4.5x4.23 in (95x114x107 mm)
- Powered by E-2D/5D/16D.
- Regulatory approvals: CE
NTI E-LDSx-y Legacy Liquid Detection Rope Sensor
Spesialis Elektronik – NTI E-LDSx-y Legacy Liquid Detection Rope Sensor
- For detecting water presence and warning of flooding.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- 100% waterproof electronics.
- Detects any liquid or moisture, except deionized water.
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- RJ45 connector.
- Voltage Supply: 12VDC
- Current Consumption: 20mA
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Bend radius: 0.375" (9.53 mm)
- Plenum rating: CL2P (UL)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Powered by E-SEMS-16U and SERIMUX-S-x.
- Regulatory approvals: CE, RoHS
- Requires the E-SEMS-16U and SERIMUX-S-x to operate.
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifing after installation
NTI E-STHS-PRC Low-Cost Temperature/Humidity/Dew Point Sensor
- Applications from 14 to 140°F ( -10 to 60°C) and 10 to 80% relative humidity.
- Accurate to within ±0.2°F (±0.1°C) and ±1.8% relative humidity.
- Supports dew point measurement.
- High resistance to external influences on the cable due to digital output signal.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS485
- Data rate: 96kbps
- Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STHSB-N4085IND-x Industrial Temperature/Humidity Sensor
- Applications from -40 to 185°F (-40 to 85°C) and 0 to 100% non-condensing relative humidity.
- Accuracy:
- ±0.7°F (± 0.4°C) at 14 to 185°F (-10 to 85°C)
- ±1.6°F (± 0.9°C) at -40 to 14°F (-40 to -10°C)
- ±3% relative humidity at 0 to 80% non-condensing RH and 86°F (30°C)
- ±4.5% relative humidity at 80 to 100% non-condensing RH and 86°F (30°C)
- High resistance to external influences on the cable due to digital output signal.
- RJ45 connector.
- Voltage supply: 5VDC
- Current consumption:
- +5V Rail: 4.9V
- DC Current: 13mA
- Communication type: RS485
- Data rate: 96kbps
- Available lengths for attached CAT5e cable: 10/25/35/50/100 feet.
- Call for pricing on custom lengths up to 1,000 feet.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STHSM-E7 Probe-Style Temperature/Humidity/Dew Point Sensor
- For use with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Not compatible with E-SEMS-16(U).
- Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% relative humidity (operating and storage).
- High resistance to external influences on the cable due to digital output signal.
- Temperature accuracy:
- ±1.44°F (±0.80°C) for -4 to 41°F (-20 to 5°C).
- ±0.72°F (±0.40°C) for 41 to 140°F (5 to 60°C).
- Humidity accuracy (at 77°F/25°C):
- 10 to 80% relative humidity: ±4%
- 20 to 80% relative humidity: ±3%
- 80 to 90% relative humidity: ±4%
- Supports dew point measurement.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1000 feet (305 m) using CATx cable (minimum 24AWG).
- MTBF: 4,195,068 hours.
- Current consumption: 7mA @5VDC.
- Powered by E-2D/5D/16D.
- Communication type: RS485
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.
NTI E-STS-O IP65 Outdoor Temperature Sensor
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±0.9°F (±0.5°C).
- Weatherproof enclosure.
- IP65-rated water and dust protection.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Quick release waterproof RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- Dimensions WxDxH (in): 4.53x2.56x2.13 (115x65x54 mm).
- MTBF: 1,860,032 hours.
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI E-STSP-7 Pipe Temperature Sensor
- Mount to the outside of a thin walled steel, copper, or aluminum pipe (up to 1/4" wall).
- Copper contact transmits surface temperature to thermal sensor.
- Weatherproof enclosure designed to IP65 specifications.
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- MTBF: 3,540,911 hours.
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Self centering mounting bracket available for 1-3" (25 mm) diameter pipe, and 3-6.5" (76 mm) diameter pipe (included).
- Included adjustable cable ties secure mounting bracket to pipe.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- Current consumption: 14mA @ 5VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Ulasan
Clear filtersBelum ada ulasan.