KATEGORI
Sensor EMS
KATEGORI
Sensor EMS
Data center monitoring system (DCMS) atau environment monitoring system (EMS) adalah solusi berbasis teknologi yang dirancang untuk mengumpulkan, menganalisis, dan menafsirkan data dari berbagai sensor.
Filter produk :
Merek
Didactum 14018 Water Leak Sensor
Didactum 14020 Water Leak Cable Sensor
Didactum 14260 Water Leak Sensing Cable
Didactum 14260.4 Water Detection Cable
NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
Spesialis Elektronik – NTI E-4WNSC-xx 4-Wire Non-Sensing Cable
- For use in areas where E-LLDS-xx sensing cable is not required.
- Available lengths: 10/25/50/100 feet and custom lengths up to 1,000 feet.
- Contact an NTI product consultant for custom cable lengths
- M12 4-pin connectors.
- 22 AWG stranded bare copper conductors.
- Color-coded plenum-grade PVC insulation.
- Plenum-grade PVC jacket.
- Cable diameter: 0.136 in
- Operating temperature: 14 to 140°F (-10 to 60°C)
- Will ship in either white or gray.
- Regulatory approvals: CE, RoHS
- Compatible with E-ALDS Addressable Leak Detection Sensor and E-LLDC-xx Liquid Location Detection Sensor Cables.
NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
Spesialis Elektronik – NTI E-LD-LCx-y Low-Cost Liquid Detection Sensor, Rope-Style
- For detecting water presence and warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Water sensor cable cannot be in contact with any conductive surfaces or overlap on itself.
- Minimum puddle: 0.06" (1.5 mm) diameter.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600 feet.
- Material: PVC twisted pair with stainless 316 elements
- Diameter: 0.14" (3.5 mm)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
NTI E-LD-SPDT Spot Liquid Detector, Point Leak Detection Sensor
NTI E-LD-SPDT Spot Liquid Detector, Point Leak Detection Sensor
- For detecting water presence and warning of flooding.
- Features gold-plated probes and microchip technology for dependable detection of conductive liquids.
- SPDT alarm contacts
- Weatherproof enclosure
- LEDs for power and alarm indication
- Ideal solution for sensing leaks under a raised computer floor or air conditioning drip pans.
- Use in large-scale network control centers, data centers, server rooms/closets, unattended remote shelters, mechanical equipment rooms, sensitive areas with overhead piping, industrial process control rooms, etc.
- Adjustable detection level.
- Probe height adjustable 0" to 1.5" (0 to 38mm)
- Current consumption: 10mA typical, 30mA maximum @ 12VDC.
- Maximum cable length: 1000 ft (305m)
- Dimensions WxDxH: 3.75x4.5x4.23 in (95x114x107 mm)
- Powered by E-2D/5D/16D.
- Regulatory approvals: CE
NTI E-LDSx-y Legacy Liquid Detection Rope Sensor
Spesialis Elektronik – NTI E-LDSx-y Legacy Liquid Detection Rope Sensor
- For detecting water presence and warning of flooding.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- 100% waterproof electronics.
- Detects any liquid or moisture, except deionized water.
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- RJ45 connector.
- Voltage Supply: 12VDC
- Current Consumption: 20mA
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Bend radius: 0.375" (9.53 mm)
- Plenum rating: CL2P (UL)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Powered by E-SEMS-16U and SERIMUX-S-x.
- Regulatory approvals: CE, RoHS
- Requires the E-SEMS-16U and SERIMUX-S-x to operate.
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifing after installation
NTI E-LDx-y Liquid Detection Sensor, Plenum Rope-Style
Spesialis Elektronik – NTI E-LDx-y Liquid Detection Sensor, Plenum Rope-Style
- For detecting water presence and warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Minimum puddle: 0.6" (15 mm) diameter.
- Detects liquid depth >0.1" (2.5 mm).
- Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope.
- Voltage and current:
- Open Circuit: 5VDC max @ 1µA.
- Closed circuit: <300mV @ 10.7mA.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Bend radius: 0.375 in (9.53 mm)
- Operating temperature: 32 to 167°F (0 to 75°C).
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Insulation and Outer Jacket Material: Plenum Grade PVC
- Diameter: 0.111 in (2.82 mm)
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
- Regulatory approvals: CE, RoHS
- MTBF: 10,869,188 hrs
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation
NTI E-LLDC-xx Liquid Location Detection Sensor Cable
Spesialis Elektronik – NTI E-LLDC-xx Liquid Location Detection Sensor Cable
- For detecting water presence at a specific location.
- 100% waterproof electronics.
- Detects any conductive liquid.
- Minimum puddle: 0.6" (15 mm) diameter.
- Detects liquid depth >0.1" (2.5 mm).
- M12 4-pin connectors.
- Available lengths: 10/25/50/100 feet and custom lengths up to 4,000 feet.
- Contact an NTI product consultant for custom cable lengths
- Bend radius: 0.375" (9.53 mm)
- Operating temperature: 32 to 167°F (0 to 75°C).
- Regulatory approvals: CE, RoHS
- MTBF: 10,869,188 hrs
- Compatible with E-ALDS Addressable Leak Detection Sensor.
- Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation
NTI E-LLS-PF Plastic Vertical Liquid Level Float Switch
- Vertically mounted float switch – install in the top or bottom of the tank (inside of the tank).
- Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
- Single-pole single-throw (SPST) circuitry.
- Configure for normally open or normally closed circuit connection.
- When installed on top of the tank and used for sensing when liquid rises to a certain level (default setting), the sensor will be "normally closed" and will open when the liquid reaches that level.
- When installed on the bottom of the tank and used for sensing the drop in the liquid level beyond a certain point, the sensor will be "normally open" and will close when the liquid drops to that level.
- To change the default setting to "normally open", simply remove the bottom clip; remove, flip and replace the float; and reinstall the clip.
- Configure for normally open or normally closed circuit connection.
- IP68-rated water and dust protection.
- Max pressure: 72.5 psi (0.5 MPa)
- Float specific gravity: 0.7
- Material:
- Float: PVDT
- Stem: PP
- Cable length: 15.75 in (40 cm)
- Wire gauge: 24 AWG
- Includes two gel-filled butt splice connectors for extending the cable length up to 1,000 feet.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor cables using the included butt splice connectors.
- Float Diameter: 0.75 in (19 mm)
- Stem length: 2 in (51 mm)
- Operating temperature: -4 to 176°F (-20 to 80°C).
- Electrical rating: AC 220V/1A; DC 24V/0.5A
- Mounting thread: M8x1.25
NTI E-LLS-SF-10CM Stainless Steel Vertical Liquid Level Float Switch
- Vertically mounted float switch – install in the top or bottom of the tank (inside of the tank).
- Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
- Single-pole single-throw (SPST) circuitry.
- Configure for normally open or normally closed circuit connection.
- When installed on top of the tank and used for sensing when liquid rises to a certain level (default setting), the sensor will be "normally closed" and will open when the liquid reaches that level.
- When installed on the bottom of the tank and used for sensing the drop in the liquid level beyond a certain point, the sensor will be "normally open" and will close when the liquid drops to that level.
- To change the default setting to "normally open", simply remove the bottom clip; remove, flip and replace the float; and reinstall the clip.
- Configure for normally open or normally closed circuit connection.
- IP68-rated water and dust protection.
- Max pressure: 217.5 psi (1.5 MPa)
- Float specific gravity: 0.7
- Material: SUS304 /SUS316L stainless steel
- Gasket material: NBR
- Cable length: 15 in (381 mm)
- Wire gauge: 26 AWG
- Wire type: Teflon
- Includes two gel-filled butt splice connectors for extending the cable length up to 1,000 feet.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor cables using the included butt splice connectors.
- Float Diameter: 1.1 in (28 mm)
- Stem length:
- E-LLS-SF-10CM: 3.93 in (100 mm)
- E-LLS-SF-25CM: 9.84 in (250 mm)
- Operating temperature: -4 to 194°F (-20 to 90°C).
- Electrical rating: AC 220V/1A; DC 24V/0.5A
- Mounting thread: M10x1.5
NTI E-SLDO-14 Compact-Size Spot Liquid Detector, Point Leak Detection Sensor
NTI E-SLDO-14 Compact-Size Spot Liquid Detector, Point Leak Detection Sensor
- Use to detect fluids in confined areas, such as condensation drip pans.
- SPDT alarm contacts
- One generic relay output
- No exposed metal sensing posts – nothing to rust or corrode
- Potted electronics — functions when submerged in water
- Adjustable detection level.
- Probe height adjustable 0" to 0.75" (0 to 19mm)
- Dimensions WxDxH: 1.55x1.0x2.0 in (39x25x51 mm)
- Cable length: 14 feet
- E-SLDO-14 includes 24V/0.5A US power supply.
- E-SLDO-14-240VTR includes 240/208/120 to 24 VAC power transformer and country-specific line cord.
- Regulatory approvals: CE, RoHS
NTI E-SLDO-A Spot Liquid Detector with Built-In Visual & Audible Alarm
NTI E-SLDO-IP68 IP68 Submersible Spot Liquid Detector
- For detecting water presence and warning of flooding.
- Features gold-plated probes and microchip technology for dependable detection of conductive liquids.
- SPDT alarm contacts
- Weatherproof enclosure
- LEDs for power and alarm indication
- Ideal solution for sensing leaks under a raised computer floor or air conditioning drip pans.
- Use in large-scale network control centers, data centers, server rooms/closets, unattended remote shelters, mechanical equipment rooms, sensitive areas with overhead piping, industrial process control rooms, etc.
- Adjustable detection level.
- Probe height adjustable 0" to 1.5" (0 to 38mm)
- Current consumption: 10mA typical, 30mA maximum @ 12VDC.
- Maximum cable length: 1000 ft (305m)
- Dimensions WxDxH: 3.75x4.5x4.23 in (95x114x107 mm)
- Powered by E-2D/5D/16D.
- Regulatory approvals: CE
NTI E-SLDO-IP68 IP68 Submersible Spot Liquid Detector
NTI E-SLDO-IP68 IP68 Submersible Spot Liquid Detector
- Use to detect fluids in confined areas, such as condensation drip pans.
- SPDT alarm contacts
- One generic relay output
- No exposed metal sensing posts – nothing to rust or corrode
- Potted electronics — functions when submerged in water
- Adjustable detection level.
- Probe height adjustable 0" to 0.75" (0 to 19mm)
- Dimensions WxDxH: 1.55x1.0x2.0 in (39x25x51 mm)
- Cable length: 14 feet
- E-SLDO-14 includes 24V/0.5A US power supply.
- E-SLDO-14-240VTR includes 240/208/120 to 24 VAC power transformer and country-specific line cord.
- Regulatory approvals: CE, RoHS
NTI E-SOD-3M Outdoor Oil Leak Detection Sensor
NTI E-SOD-3M Outdoor Oil Leak Detection Sensor
- Use to detect conductive fluids in confined areas
- Place the sensor on a flat surface under HVAC equipment, dishwashers, washing machines, refrigerators, compressors, or electrical switchgear rooms and other potential leakage areas.
- Water level detection range: 0.03 to 0.53" (0.79 to 13 mm).
- DPDT alarm contacts.
- Audible alarm signal: 85 dB at 1 foot distance.
- Red LED for visual alarm signal.
- Green LED for power
- Current consumption: 30mA typical, 85mA maximum @ 12VDC.
- Dimensions WxDxH: 2x4.13x0.19 in (51x105x30 mm).
- Includes adjustable mounting bracket attached via adhesive strips or two screws.
- Operating temperature: 32 to 122°F (0 to 50°C).
- Powered by E-2D/5D/16D.
- Cable length: 4.9 ft (1.5 m)
- Regulatory approvals: CE, RoHS.
